Features a rip capacity of up to 25 inches for taking on 4×8 plywood and OSB sheets. Powerful 11-amp motor rotates the included 8.25-inch TCT 24T blade up to 4500 RPM. Adjust both the height and angle of the blade to cut boards up to 2.75 inches thick at 90 degrees and 2 inches thick at 45 degrees. Compact design combined with onboard carrying handle make for easy storage and transportation. Remember when you had the power of a table saw whenever and wherever you needed it? The WEN 11-Amp 8.25-Inch Benchtop Table Saw provides a compact and portable solution for sawing straight, long cuts on larger workpieces. Our spacious table extends out for a rip-cut capacity of up to 25 inches, perfect for ripping 4×8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 2.75 inches. The angle of the blade can also be adjusted for bevel cuts up to 2 inches thick at 45 degrees. The tool-free blade guard can be easily installed or removed as needed, while the extension arm increases the 18.9-by-18.4-inch table all the way out to 18.9 by 36 inches in size. The compact housing measures in with a footprint of a mere 15.5 by 23 inches, and includes a side carrying handle for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes an 8.25-inch TCT 24T blade with 5/8-inch arbor, an adjustable rip fence, an auxiliary fence for workpieces less than 1/10 of an inch thick, a miter gauge, a push stick, a dust port adapter, a riving knife to limit kickback, and onboard storage for easy organization. Remember when you had a saw that could really rip?