https://tablesawfenceonline.com Sat, 19 Sep 2026 17:06:39 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/ryobi-bt3000-3100-craftsman-315-228110-10-table-saw-rip-fence-assembly/ https://tablesawfenceonline.com/ryobi-bt3000-3100-craftsman-315-228110-10-table-saw-rip-fence-assembly/#comments Sat, 19 Sep 2026 17:06:39 +0000 https://tablesawfenceonline.com/ryobi-bt3000-3100-craftsman-315-228110-10-table-saw-rip-fence-assembly/






NO CRACKS in the all important end cap see photos – both sides shown.

]]> https://tablesawfenceonline.com/ryobi-bt3000-3100-craftsman-315-228110-10-table-saw-rip-fence-assembly/feed/ 0 https://tablesawfenceonline.com/table-saw-miter-gauge-micro-adjust-flip-stop-precision-angle-stops-18-inch/ https://tablesawfenceonline.com/table-saw-miter-gauge-micro-adjust-flip-stop-precision-angle-stops-18-inch/#comments Sat, 19 Sep 2026 01:04:42 +0000 https://tablesawfenceonline.com/table-saw-miter-gauge-micro-adjust-flip-stop-precision-angle-stops-18-inch/










Table Saw Miter Gauge Micro Adjust Flip Stop Precision Angle Stops 18 Inch. The micro adjustable flip stop of miter gauge is rock-solid when locked and accuracy is up to 0.001. Ensure accurate cutting every time. The adjustment is smooth and fluid with minimal backlash. You can easily to read scales and adjust through micro adjust function and magnifier glass. We also support square face and angle faces workpieces with locating pin. Miter gauge is a must have table saw accessories for miter cuts and square cuts. Rapid, precision miter gauge adjustment-set exact angles quickly and accurately for flawless crosscuts and miter cuts. Provides a new precision angle adjust stops with one simple button and position holes. You can easily pull up and rotate the button and turn the protractor. The pin locates your angle you need precisely and lock angles security while you tighten the handle. Provides 13 accurate positive angle stops from -67.5-67.5° and a locking handles. Includes Angle Stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Table saw miter gauge protractor is easy to set up and use. Multifunction micro adjust flip stop is easy to zero calibration and make you can get right 0 position on the miter gauge fence. And you can use the scales on the fence to cut any length you need, you do not have to use a tape and rulers. You can change angles fast and accurate through positioning button and holes for miter cuts and square cuts. Miter gauge for table saw includes 18 inch precision extruded fence with mm and inch scales. After zero calibration, you do not have to go back to using a tape and rulers and you can get exact length according to the scales. Micro adjustable flip stop on fence make accurate adjust and magnifier glass on pointer make easy to read and align scales on miter gauge fence. Miter gauge for table saw fits standard 3&#######x2F;8″ x 3&#######x2F;4″ T slot and U slot. The adjustable miter bars fits for most table saw. Miter bars adapts to any table saw with a 3&#######x2F;8″ x 3&#######x2F;4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot and keep the bar perfectly aligned. No play on the miter slots and slides smooth ensure accurate cuts all the time. Miter gauge is made of aluminum alloy and also includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Miter bars adapts to any table. We offer great prices on quality products across a wide range of categories. We work hard to get every order to you as quickly as possible. Your satisfaction is our top priority. We want every customer to have a great experience from start to finish. If there’s ever a problem with your order, please message us and we’ll make it right as quickly as possible.

]]> https://tablesawfenceonline.com/table-saw-miter-gauge-micro-adjust-flip-stop-precision-angle-stops-18-inch/feed/ 0 https://tablesawfenceonline.com/see-item-description-delta-36-600-table-saw-rip-fence-only/ https://tablesawfenceonline.com/see-item-description-delta-36-600-table-saw-rip-fence-only/#comments Fri, 18 Sep 2026 09:02:43 +0000 https://tablesawfenceonline.com/see-item-description-delta-36-600-table-saw-rip-fence-only/














From a working table saw. See photos for full condition and details. Visit my online shop. For even more table saw parts!

]]> https://tablesawfenceonline.com/see-item-description-delta-36-600-table-saw-rip-fence-only/feed/ 0 https://tablesawfenceonline.com/read-craftsman-137-218071-or-137-218072-table-saw-rip-fence-bracket-assembly/ https://tablesawfenceonline.com/read-craftsman-137-218071-or-137-218072-table-saw-rip-fence-bracket-assembly/#comments Thu, 17 Sep 2026 17:00:43 +0000 https://tablesawfenceonline.com/read-craftsman-137-218071-or-137-218072-table-saw-rip-fence-bracket-assembly/














NOTE – these 137 model fences are NOT generally interchangable between models. I know this one fits a 137.218071 or 137.218072. The only way to know for sure is to lookup the user manual for this saw model (as well as your saw model) online to compare part numbers and confirm a match before purchasing. Visit my online shop. For even more table saw parts!

]]> https://tablesawfenceonline.com/read-craftsman-137-218071-or-137-218072-table-saw-rip-fence-bracket-assembly/feed/ 0 https://tablesawfenceonline.com/craftsman-113-model-10-table-saw-rip-fence-guide-rails-27-very-nice/ https://tablesawfenceonline.com/craftsman-113-model-10-table-saw-rip-fence-guide-rails-27-very-nice/#comments Thu, 17 Sep 2026 08:59:27 +0000 https://tablesawfenceonline.com/craftsman-113-model-10-table-saw-rip-fence-guide-rails-27-very-nice/

























Craftsman 113 model – 10″ Table Saw Rip Fence & Guide Rails, 27″ Top LIKE NEW. This system will fit any Craftsman 113 series having a 27 cast iron top. Comes with all mounting hardware as shown. The Fence is in Very Good to Excellent Condition. The guide rails are in very good condition, the ruler is in very good readable condition. Clamps and Slides well. No Saw Blade Marks. A Very nice set.

]]> https://tablesawfenceonline.com/craftsman-113-model-10-table-saw-rip-fence-guide-rails-27-very-nice/feed/ 0 https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use-2/ https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use-2/#comments Thu, 17 Sep 2026 00:56:54 +0000 https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use-2/

























Micro Adjustable Flip Stop: The miter gauge is equipped with micro adjustment fence stop, with an accuracy of up to 0.001 inch (0.0254mm), ensuring precise horizontal and oblique cutting; The flip stop is sturdy and stable, without shaking, ensuring safe work during woodworking or crafting projects. It also supports quadrate and inclined workpieces with locating pins 2. Zero Calibration Function: The miter gauge is equipped with zero adjustment knob, providing convenient and fast zero setting without the need for other tools. Firstly, move the fence closer to the sawblade, ensuring there is a space of 1-3mm between the sawblade and the fence. Then, slide and flip the stop block to make contacts with the sawblade. Finally, rotate the zero calibration knob to align the 0 scale 3. Accurate Angle Setting: This table saw miter gauge provides precise positive angle adjustment block, which can quickly set 11 angles of 60°, 45°, 30°, 22.5°, 10°, 0°, -60°, -45°, -30°, -22.5°, and -10°. The fast and stable angle block lock can be easily adjusted to ensure that the angle is firmly locked in place 4. Extendable Fence: The miter gauge is equipped with extendable fence that supports horizontal cutting up to 36 inch. The sturdy structure and stable telescopic system enable precise adjustment. The standard workpiece size is 19.5 inch, is more convenient to use. You can easily cut from 0 to 36 inch using the fence 5. Other Accessories: Featuring mm and inch scales, and also provides concealed flip stop for easy repeated cutting. There are two slots at the front of the baffle, where you can add additional accessories or add the baffle yourself. The front, end, and middle of the diagonal cutting rod are equipped with adjusters to ensure stable and snug sliding on the table saw slot 6. Wide Application: The table saw guide rail is easy to adjust, allowing the sliding rod of the table saw and the miter gauge to fit properly. This table saw angle guide rail is suitable for 3/8 x 3/4 inch T slot and U slot table saws, band saws, and router tables. Item Type: Table Saw Miter Gauge Product Material: Aluminum Alloy Angle Adjustment Options: 60°, 45°, 30°, 22.5°, 10°, 0°, -60°, -45°, -30°, -22.5°, -10° Applicable T Slot: 3/8 x 3/4 inch (19×9.5mm) Angle Fixing Method: 11 Preset Angles Adjustable Fence Range: Approx. 500-950mm / 19.7-37.4in. 1 x Miter Gauge 1 x T Slot Rail 1 x Stop Block 1 x Handle 3 x Hex Wrenches 1 x Open End Wrench. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use-2/feed/ 0 https://tablesawfenceonline.com/delta-unisaw-unifence-saw-guide-table-saw-rip-fence-assembly-9/ https://tablesawfenceonline.com/delta-unisaw-unifence-saw-guide-table-saw-rip-fence-assembly-9/#comments Wed, 16 Sep 2026 08:54:46 +0000 https://tablesawfenceonline.com/delta-unisaw-unifence-saw-guide-table-saw-rip-fence-assembly-9/














NOTE – it’s missing the plastic “glassing” indicator to show where you are on the guide rail tape measure. Fits a Unisaw Fence that is. 3.4 inches wide. 1-3/4 tall on the front/narrow end. About 2 tall on the back/wider end. For even more table saw parts!

]]> https://tablesawfenceonline.com/delta-unisaw-unifence-saw-guide-table-saw-rip-fence-assembly-9/feed/ 0 https://tablesawfenceonline.com/bow-products-xt-xtender-xt536-table-saw-fence-system-24in-fence-only/ https://tablesawfenceonline.com/bow-products-xt-xtender-xt536-table-saw-fence-system-24in-fence-only/#comments Wed, 16 Sep 2026 00:53:42 +0000 https://tablesawfenceonline.com/bow-products-xt-xtender-xt536-table-saw-fence-system-24in-fence-only/





BOW Products XT XTENDER XT536 Table Saw Fence System 24in (Fence Only). This 24-inch fence extension system adds a taller, longer working surface to your table saw, portable saw, band saw, cabinet saw, or router table. The 5-inch tall aluminum extrusion with a 4-inch flat face attaches quickly to your existing fence using the rear slots, allowing you to position it forward, centered, or back depending on your cut needs. Multiple T-slots along the face, top, and back accept 1/4-inch and 5/16-inch T-bolts for featherboards and other accessories.

]]> https://tablesawfenceonline.com/bow-products-xt-xtender-xt536-table-saw-fence-system-24in-fence-only/feed/ 0 https://tablesawfenceonline.com/71395-taperstraight-line-jig-for-table-saws-with-34-wide-by-38-deep-miter-s-20/ https://tablesawfenceonline.com/71395-taperstraight-line-jig-for-table-saws-with-34-wide-by-38-deep-miter-s-20/#comments Tue, 15 Sep 2026 16:52:46 +0000 https://tablesawfenceonline.com/71395-taperstraight-line-jig-for-table-saws-with-34-wide-by-38-deep-miter-s-20/










71395 Taper/Straight Line Jig for Table Saws with 3/4″ Wide by 3/8″ Deep Miter Slot. 40.55 x 8.66 x 2.36 inches. Taper Jig, 1 Set. Straight Line Taper Jig. Taper / Straight Line Jig. Introducing the Taper / Straight Line Jig by POWERTEC. This multi-functional woodworking taper jig is designed to make quick, easy and high precision tapered cuts. All-Inclusive, it features everything you need to safely cut long, angled tapers and straight edges along your board and workpiece. It fits tight and securely in any standard 3/8″ x 3/4″ miter slot and features an ergonomic handle for seamless push-action performance throughout the cutting process. The jig assembly features. Indexing marks for simplistic angle setting. Abrasive grip strips to stabilize your stock. Non-marring caps on the clamps to prevent damage. 5 Star Knobs to comfortably anchor your stock without stripping or damaging. Hold down clamps to prevent your workpiece from moving and drifting from your fence. 1 – Base 32″ x 7-7/8″ ½ MDF with melamine coating on both sides. 1 – Adjustable fence 2-1/2″ wide x 1-1/32″ thick by 32 long MDF, melamine coating on both sides, and pre-assembled stop plate. 1 – Aluminum miter bar ¾”x 3/8″ x 36. 1 – Tapered knob, 4 long. 2 – Hold Down Clamps, 5-1/2 long. 4 – Five Star knobs. 2 – Tape Measure with self-adhesive back. 3 – Abrasive grip strips, 1-1/2″ x 7″. 4 – T-Bolts, 5/16-18 x 2-1/2. 1 – 5/16-18 x 1 flat head screw. 3 – ¼”-20 x ¾” screw. 5 – 5/16 washers. 9 – Nylon adjustment screws, #10-32. 1 – Mini screw driver. ASSEMBLY CONTAINS: 36 Miter Bar, Base, Adjustable Fence, Push Knob, Hold Down Clamps, Tape Measure, Abrasive Grip Strips, T-Bolts, Hardware Screws, Washers and Mini Screw Driver. FUNCTIONS: Primarily serves as a taper cutting jig for table saw – Secondarily operates as a stable straight line ripping jig – Your creativity is the limit. PREMIUM BUILD: This woodworking taper jig is manufactured with high quality components; The base measures 32″ x 7-7/8″ ½ with MDF construction and melamine coating on both sides; Features a safe and easy-to-use design, indexing marks for easy angle setting, ergonomic anti-slip push knob, adjustable fence and hold down clamps to prevent shifting stock, abrasive grip strips to help stabilize your workpiece and detailed instructions for all skill levels. VERSATILE: Perfect for cutting tapered compound angles, straight line table saw ripping, making handmade furniture, and a wide range of applications such as making chair legs, building tables, custom built shelves or base cabinets and more. PLEASE NOTE: It fits tight and securely in any standard 3/8″ x 3/4″ miter slot. PLEASE NOTE: The taper jig is designed to fit full-sized table saws with miter slots measuring ¾” x 3/8″ and an inside edge of the right miter slot between 3-3/4″ to 4-3/8″, 5″ to 5-5/8″, or 6-1/4″ to 6-7/8″ from the blade. It is compatible with the DWE7491RS but may not fit some job site or bench top saws. Please check your saw’s specifications before ordering. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

]]> https://tablesawfenceonline.com/71395-taperstraight-line-jig-for-table-saws-with-34-wide-by-38-deep-miter-s-20/feed/ 0 https://tablesawfenceonline.com/table-saw-fence-set-black-silver-adjustable-for-woodworkers/ https://tablesawfenceonline.com/table-saw-fence-set-black-silver-adjustable-for-woodworkers/#comments Tue, 15 Sep 2026 08:51:45 +0000 https://tablesawfenceonline.com/table-saw-fence-set-black-silver-adjustable-for-woodworkers/













Made of high-quality aluminum alloy material, smooth to slide, not easy to deform 2. Using CNC processing to make fine scales 3. The scale fine adjustment knob adopts pure brass knurled nut, easy to adjust 4. Smooth curved lines and comfortable grip which is ergonomic 5. The tenoning caliper design is consistent in the width of each pair of teeth, easy to operate. Item Type: Table Saw Fence. Material: Engineering Plastics + Aluminum Color: Black + Silver Specifications(optional): 800mm Table Saw Fence, 1000mm Table Saw Fence. Suitable for flip-chip electric circular saw. 1 x Scale Chute 800mm. 1 x Small Bracket. 1 x Main Bracket. 1 x Auxiliary Bracket. 1 x Push Handle. 2 x Small Bracket Fixing Block. 1 x Rod Fixing Block. 2 x Main and Auxiliary Bracket Fixing Block. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/table-saw-fence-set-black-silver-adjustable-for-woodworkers/feed/ 0