https://tablesawfenceonline.com Fri, 08 May 2026 03:06:53 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/fence-assembly-delta-rockwell-10-unisaw-with-front-rear-clamps-for-1-38-tube/ https://tablesawfenceonline.com/fence-assembly-delta-rockwell-10-unisaw-with-front-rear-clamps-for-1-38-tube/#comments Wed, 06 May 2026 19:00:42 +0000 https://tablesawfenceonline.com/fence-assembly-delta-rockwell-10-unisaw-with-front-rear-clamps-for-1-38-tube/







The Delta Rockwell LTA 450 is a vintage, heavy-duty metal rip fence assembly designed for 10-inch Unisaw table saws, commonly found on mid-1950s to 1960s models. Known for its robust, classic design, this features a manual locking mechanism for stability. Original rip fence assembly for 10 Unisaw Model 34-450. Design: Heavy-duty metal construction featuring a sliding, locking mechanism (often referred to as a “lock fence”) that tightens down on the table to provide a secure, accurate rip. Measures approximate 33.5 long (not including lock handle). Used condition with rust spots. Please see pictures for more on condition. Also, please take a look at our other listings. Thanks for viewing our item!

]]> https://tablesawfenceonline.com/fence-assembly-delta-rockwell-10-unisaw-with-front-rear-clamps-for-1-38-tube/feed/ 0 https://tablesawfenceonline.com/delta-rockwell-unisaw-10-table-saw-rip-fence-rear-clamp-for-1-38-dia-rails/ https://tablesawfenceonline.com/delta-rockwell-unisaw-10-table-saw-rip-fence-rear-clamp-for-1-38-dia-rails/#comments Fri, 24 Apr 2026 09:58:08 +0000 https://tablesawfenceonline.com/delta-rockwell-unisaw-10-table-saw-rip-fence-rear-clamp-for-1-38-dia-rails/





Repainted and in great condition.

]]> https://tablesawfenceonline.com/delta-rockwell-unisaw-10-table-saw-rip-fence-rear-clamp-for-1-38-dia-rails/feed/ 0 https://tablesawfenceonline.com/ridgid-r4517-job-site-table-saw-front-rear-guide-rails-for-rip-fence/ https://tablesawfenceonline.com/ridgid-r4517-job-site-table-saw-front-rear-guide-rails-for-rip-fence/#comments Thu, 19 Feb 2026 15:13:03 +0000 https://tablesawfenceonline.com/ridgid-r4517-job-site-table-saw-front-rear-guide-rails-for-rip-fence/











R4517 Ridgid Table saw, which is a job site saw. INCLUDES the front and back rails and mounting hardware ONLY. If you are using this for anything other than a R4517, be sure to locate a parts diagram online to compare. For even more table saw parts!

]]> https://tablesawfenceonline.com/ridgid-r4517-job-site-table-saw-front-rear-guide-rails-for-rip-fence/feed/ 0 https://tablesawfenceonline.com/all-new-replacement-rear-clamp-block-for-your-delta-unisaw-fence/ https://tablesawfenceonline.com/all-new-replacement-rear-clamp-block-for-your-delta-unisaw-fence/#comments Fri, 30 Jan 2026 06:05:54 +0000 https://tablesawfenceonline.com/all-new-replacement-rear-clamp-block-for-your-delta-unisaw-fence/











A new billet aluminum replacement rear clamp block for your Delta Unisaw fence. This is a replacement clamp block for the rear of the Delta Unisaw fence. The clamp block is the same for early style Delta Micro-set fences and the later version one-lever Delta Jet-lock fences. The original equipment die cast zinc clamp block located at the rear of the Unisaw fence is very much prone to breakage. The original clamp block is extremely weak at the center area where the slot is and will easily fracture if the fence is accidently dropped or bumped hard. One attached photo shows the very typical OEM fractured clamp blocks. Another problem with the OEM clamp block is that the tapped mounting holes in the thin die cast pot metal often strip out, making securing the block to the fence nearly impossible. This all new, well designed replacement clamp block is precision machined on CNC equipment from 6061 billet aluminum bar stock and will forever solve the problem of the rear fence clamp mechanism failure. Our clamp block kit, as shown disassembled in one of the photos, includes the new aluminum block, new J-hook, and everything necessary to replace the entire original clamp block assembly. One (1) CNC machined billet aluminum clamp block. One (1) black oxide plated carbon steel machined and formed J-hook. One (1) laser cut high strength 4130 chromoly alloy steel replacement cam. One (1) zinc plated music wire compression spring. One (1) ¼ diameter alloy steel dowel pin for the lever pivot. Two (2) 5/16 stainless steel mounting bolts to secure the block to the fence. Two (2) stainless flat washers for the above mounting bolts. Only the very early Delta Unisaw fences require that a minor modification be made to accommodate this new heavy duty billet aluminum clamp block. Two fence rails are shown in the one photo to illustrate the slight modification required. The one on the bottom has been modified by removing a short portion of the end of the tack welded gusset at the bottom side of the rail. This is easily accomplished by partially cutting across the web with a hacksaw or cut-off wheel and using pliers to bend, break, and remove the last 1.5 of the gusset material. Later Unisaw fences have clearance already provided in this area and accept our billet aluminum clamp block without modification.

]]> https://tablesawfenceonline.com/all-new-replacement-rear-clamp-block-for-your-delta-unisaw-fence/feed/ 0 https://tablesawfenceonline.com/ridgid-r4512-table-saw-rip-fence-rear-rail/ https://tablesawfenceonline.com/ridgid-r4512-table-saw-rip-fence-rear-rail/#comments Tue, 11 Nov 2025 09:07:50 +0000 https://tablesawfenceonline.com/ridgid-r4512-table-saw-rip-fence-rear-rail/






Lightly used with very little cosmetic issues. Includes the entire rear rail.

]]> https://tablesawfenceonline.com/ridgid-r4512-table-saw-rip-fence-rear-rail/feed/ 0 https://tablesawfenceonline.com/delta-shopmaster-ts300-table-saw-rip-fence-front-and-rear-rail-set/ https://tablesawfenceonline.com/delta-shopmaster-ts300-table-saw-rip-fence-front-and-rear-rail-set/#comments Wed, 11 Jun 2025 18:07:47 +0000 https://tablesawfenceonline.com/delta-shopmaster-ts300-table-saw-rip-fence-front-and-rear-rail-set/









Delta TS300 table saw fence and rails assembly off a TS300 table saw with a 22.25 deep top. Very nice damage free condition as shown with some paint loss and patina and works perfectly with no blade marks on the fence and mounting bolts included.

]]> https://tablesawfenceonline.com/delta-shopmaster-ts300-table-saw-rip-fence-front-and-rear-rail-set/feed/ 0 https://tablesawfenceonline.com/new-ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/ https://tablesawfenceonline.com/new-ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/#comments Wed, 09 Apr 2025 22:32:02 +0000 https://tablesawfenceonline.com/new-ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/





















R4512 or R4520 Ridgid Table saw. INCLUDES the front and back rails and mounting hardware.. The rip fence is NOT included. For even more table saw parts!

]]> https://tablesawfenceonline.com/new-ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/feed/ 0 https://tablesawfenceonline.com/ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/ https://tablesawfenceonline.com/ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/#comments Sat, 18 Jan 2025 23:15:04 +0000 https://tablesawfenceonline.com/ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/














R4512 or R4520 Ridgid Table saw. INCLUDES the front and back rails and mounting hardware ONLY. For even more table saw parts!

]]> https://tablesawfenceonline.com/ridgid-r4512-or-r4520-table-saw-front-rear-guide-rails-for-rip-fence/feed/ 0 https://tablesawfenceonline.com/rip-fence-1348731-withfront-rear-rails-for-10-delta-ts300-motorized-table-saw/ https://tablesawfenceonline.com/rip-fence-1348731-withfront-rear-rails-for-10-delta-ts300-motorized-table-saw/#comments Sun, 03 Nov 2024 19:02:43 +0000 https://tablesawfenceonline.com/rip-fence-1348731-withfront-rear-rails-for-10-delta-ts300-motorized-table-saw/
















Up for sale is rip fence with front & rear rails from a 10 Delta TS300 motorized table saw. They’re made for a table with a width of 20-3/8″ & a depth of 22-1/4″. The complete set will work for some other Delta saws with a table depth of 22-1/4, check the hole spacing on your saw to see if it’s compatible. The holes in the cast iron table must be centered 1 down from the top of the table. They show very little usage. There’re a few specks of rust due to storage in a damp locale. Fastenings included for the rails. One of the end caps is missing from the front fence rail.

]]> https://tablesawfenceonline.com/rip-fence-1348731-withfront-rear-rails-for-10-delta-ts300-motorized-table-saw/feed/ 0 https://tablesawfenceonline.com/craftsman-113-xxxxxx-rip-fence-parts-62528-spring-fence-lock-62529-lock-rear/ https://tablesawfenceonline.com/craftsman-113-xxxxxx-rip-fence-parts-62528-spring-fence-lock-62529-lock-rear/#comments Sat, 20 Apr 2024 07:26:37 +0000 https://tablesawfenceonline.com/craftsman-113-xxxxxx-rip-fence-parts-62528-spring-fence-lock-62529-lock-rear/










These are valuable, hard-to-find parts for a 113 rip fence.. Consult your user manual (typically available online) to confirm if the part numbers are a match for your needs. Visit my online shop. For even more table saw parts!

]]> https://tablesawfenceonline.com/craftsman-113-xxxxxx-rip-fence-parts-62528-spring-fence-lock-62529-lock-rear/feed/ 0