https://tablesawfenceonline.com Mon, 10 Aug 2026 22:51:02 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/#comments Mon, 10 Aug 2026 06:48:38 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/






Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/ https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/#comments Fri, 31 Jul 2026 14:10:42 +0000 https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/









Need more than the quantity listed? 71391 Table Saw Precision Miter Gauge System W/ 27 Angle Stops and 3/4″X 3/8″T-Slotted Miter Bar W/Removable T-Slot Plate; Includes 24″X 3″ Multi T-Track Fence W/Scale, T-Track Flip Stop. Other Special Features of the Product. High precision miter gauge with 1-degree step spacing, 27 angle stops, multi-track fence, miter saw flip stop, and compatibility with table saws. Item Dimensions L x W x H. 4.62″L x 3.37″W x 25H. Table Saw Precision Miter Gauge System with 27 Angle Stops. Global Trade Identification Number. 71391 Table Saw Precision Miter Gauge System 24″ x 3″ multi -track fence with 27 Angle Stops. Introducing the Table Saw Precision Miter Gauge System by POWERTEC. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops that do not require calibration. Set Contains the Following: (1) High Precision Miter Gauge, (1) Multi Track Fence with Laser Engraved Scale (24 inch long by x 3 inch tall), (1) 3 T-Track Flip Stop (multi position). Miter Gauge Features 27 angle indexing stops, Laser-cut aluminum construction, A multi-functional 45 Degree setting, 4 expansion discs that adjust to remove all side play. A removable T-slot plate that can be used with T-slotted miter slots. Works in standard 3/4″ x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence Fence. Features Laser engraved 24″ scale, right to left 24″ x 3 tall multi-track T-slots (fence section). Made out of anodized extruded aluminum for strength and durability Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts, and T-track accessories. Possesses optimal versatility as a miter gauge fence, router or shaper table saw miter gauge fence and table saw sub-fence, chop or radial arm saw fence. Flip Stop Features can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16) puts the control in your hands allowing you to use the included aluminum T-track fence or a custom built sacrificial fence. Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop. Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results. High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30°and 45°and nine others, both left and right Works in standard 3/4″ x 3/8″ miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8 miter slots. Multi-track miter fence: smooth, built-in laser engraved measuring scale, extruded aluminum profile with a universal design that accepts accept 1/4″-20 hex Bots, 1/4″ t-bolts and 5/16 T- bolts, and T-track accessories. Miter saw flip stop: delivers exceptional cut-length control, with a toolless locking mechanism and adjustable settings to quick change to the left or right side of the blade. We’re committed to offering great deals on quality products you can trust. From home décor and garden essentials to tools, hardware, and pet accessories, there’s something for everyone at prices you’ll love. We do everything we can to ensure every customer is fully satisfied. If something is not right, send us a message and we will take care of it quickly.

]]> https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/feed/ 0 https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/ https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/#comments Wed, 29 Jul 2026 22:02:41 +0000 https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/










Need more than the quantity listed? Table Saw Miter Gauge with Micro Adjust Flip Stop and Extentable Fence from 18 to 32 Inch and 13 Angle Position Stops, Miter Gauge for Table Saw for Crosscut and Miters, Fit 3/8″ X 3/4″ Slot. 19.8 x 7.4 x 3.7 inches. 1 x Miter Gauge for Table Saw with Extentable Fence, 1 x User Manual. GOINGMAKE miter gauge with Extendable Fence and Micro Adjust Flip Stop. Adjustable fence from 18-32 inch. Accuracy up to 0.001 inch with new micro adjust flip stop. Giving you an exact measurement to the stop. The fence includes mm and inch scales and you can easily read scales through the magnifier glass on the flip stops. Easy for miter cuts and square cuts. Upgrade Angle Stops with Button and Precision Holes. Precision angle stops with simple button and position holes. Easily pull up, rotate the button and turn the protractor. The pin locates the angle precisely and lock angles security while tighten the handle. Includes Angle: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Extendable Fence from 18 to 32 Inch with MM and Inch Scales. When you need the fence extended, you do not have to go back to using a tape and rulers. Just lock the flip stop on the mark of 16 inch on the main fence and set your dimension on 16 inch scale of the extension bar. And you can get exact extendable length according to the scales. Micro Adjustable Flip Stop with Magnifier Glass. The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. Ensure accurate cutting every time. The adjustment is smooth and fluid with minimal backlash. Easy to Set Up and Use. Multifunction micro adjust flip stop is easy to zero calibration and make you can get right 0 position on the miter gauge fence. And you can use the scales on the fence to cut any length you need, you do not have to use a tape and rulers. Zero Fit Miter Bar Fits for Most Table Saw. Adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot. No play on the miter slots and slides smooth ensure accurate cuts all the time. Sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Accurately for Crosscuts and Miter Cuts. Multifunctional flip stop and precision angle set up for precision square cuts and miter cuts. Extentable Aluminum Alloy Fence from 18 to 32 Inch? GOINGMAKE miter gauge for table saw includes the precision extruded fence extendable from 18 inch to 32 inch. Including mm and inch scales for your different needs. Micro adjustable flip stop on fence make accurate adjust and magnifier glass on pointer make easy to read and align scales on miter gauge fence. Micro Adjustable Flip Stop with Magnifier Glass? The micro adjustable flip stop of GOINGMAKE table saw miter gauge is rock-solid when locked and accuracy is up to 0.001. You can easily to read scales and adjust through micro adjust function and magnifier glass. We also support square face and angle faces workpieces with locating pin. Upgrade Angle Stops with Button and Precision Holes? GOINGMAKE miter gauge is a must have table saw accessories for miter cuts and square cuts. Rapid, precision miter gauge adjustment-set exact angles quickly and accurately for flawless crosscuts and miter cuts. Provides a new precision angle adjust stops with one simple button and position holes. You can easily pull up and rotate the button and turn the protractor. The pin locates your angle you need precisely and lock angles security while you tighten the handle. Provides 13 accurate positive angle stops from -67.5-67.5° and a locking handles. Includes Angle Stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. The adjustable miter bars fits for most table saw. GOINGMAKE miter bars adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot and keep the bar perfectly aligned. GOINGMAKE miter gauge is made of aluminum alloy and also includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Easy to Set Up and Use? GOINGMAKE table saw miter gauge protractor is easy to set up and use. You can change angles fast and accurate through positioning button and holes for miter cuts and square cuts. We’re committed to offering great deals on quality products you can trust. From home décor and garden essentials to tools, hardware, and pet accessories, there’s something for everyone at prices you’ll love. We do everything we can to ensure every customer is fully satisfied. If something is not right, send us a message and we will take care of it quickly.

]]> https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/#comments Wed, 29 Jul 2026 14:01:45 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/











Precision Miter Gauge with Aluminum Fence. Elevate your woodworking experience with our Precision Miter Gauge, designed to meet the highest standards of quality and performance. Crafted from steel plate, this versatile tool is the economical solution for your table saw cross cutting needs. Made from high-quality steel plate for durability and exceptional performance. Aluminum miter fence with 45-degree ends offers superior workpiece support. Handy aluminum flip stop for repetitive angled cuts, enhancing your productivity. Thick, adjustable solid aluminum head with 120 positive stop holes for precise angles. 27 Angle Stops with 5-Degree Increments for unmatched accuracy; laser marking technology ensures friction-resistance during use. Metric scale on miter gauge fence for easy measurements. Integrated tenoning function, allowing for customized board sizes. Universal fence mounting bracket and pivoting locking mechanism provide flexibility during setup. Removable plate enables compatibility with T-slotted and non T-slotted miter slots. Equipped with an adjustable expansion disc and removable retaining disc for precise positioning. Why Choose Our Precision Miter Gauge? Crafted for woodworking aficionados, this miter gauge is made of a single piece of extruded aluminum, promising durability and precise tracking. The uniquely designed 45-degree ends allow for close positioning to the saw blade, giving you unparalleled control over your workpiece. Free yourself from the constraints of inferior tools and elevate every cut with accuracy and ease. Whether you’re a seasoned professional or a passionate DIY enthusiast, our Precision Miter Gauge is the perfect addition to your workshop. Embrace your creativity and enhance the efficiency of your projects – order now and redefine perfection in woodworking! Item Weight: 8.8 ounces. Item Diameter: 1 x 1 x 1 inches. Suitable For: Metal, Plastic, Wood. Set Includes: Case, aluminum table saw miter gauge, aluminum miter fence, aluminum flip stop, curve ruler. Number of Items in Set: 1. Number of Batteries: 0.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/feed/ 0 https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys-2/ https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys-2/#comments Wed, 29 Jul 2026 06:00:41 +0000 https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys-2/








Benchdog Imperial CSC SYS Fence Kit – Precision Cross-Cut System with Flip Stops Â. If you own a Festool CSC SYS Table Saw, you know how challenging it can be to achieve accurate and repeatable cross-cuts. The Benchdog CSC SYS Fence Kit solves that problem with a precision-machined aluminum adaptor plate that allows you to securely attach Benchdog CSC Fences to your saw for flawless accuracy and consistency. Each fence features laser-engraved scale markings set at 1/16″ intervals and offset 1/16″ from the blade for safe, accurate referencing. With fence lengths available in 330 mm (12.99″), 625 mm (24.61″), and 990 mm (38.98), you can customize your setup for any project. The 625 mm (24.61″) and 990 mm (38.98″) kits include a material support plate with a dial-in thumbscrew for perfect workpiece alignment. Made from anodized aerospace-grade aluminum, this kit reflects Benchdog Tools’ commitment to producing precision woodworking tools built to last. Designed for the Festool CSC SYS Table Saw. Enables accurate, repeatable cross-cuts. Includes marked fences with laser scale and flag stops. Compatible with multiple fence lengths: 330 mm (12.99″) / 625 mm (24.61″) / 990 mm (38.98). Includes a material support plate and guard lifter. Precision-machined anodized aluminum adaptor plate. Proudly made in Britain. 330 mm (12.99) Fence Kit. 1 Ã- Machined Aluminum Adaptor Plate (Anodized Black). 1 Ã- Fence 330 mm (12.99). 1 Ã- Flag Stop (Red, Green, or Blue)Â. 1 Ã- 3D-Printed Guard Lifter. 2 Ã- Stainless Steel Thumbscrews. 2 Ã- M6 T-Nuts. 1 Ã- M6 Ã- 25 Thumbscrew. 1 Ã- M6 Calibration Screw with M6 T-Nut. 625 mm (24.61) Fence Kit. 1 Ã- Fence 625 mm (24.61). 1 Ã- Material Support Plate with Fixings. 990 mm (38.98) Fence Kit. 3 Ã- Fence Sections, each 330 mm (12.99). 1 Ã- Flag Stop (Red, Green, or Blue). 6 Ã- Joining Bars & Hex Key. 1 Ã- M6 Calibration Screw with M6 T-NUT. 990 mm (38.98) Fence SYS Kit. 1 Ã- Fence 990 mm (38.98) (supplied as 3 Ã- 330 mm sections). 3 Ã- Flag Stops Red, Green. 1 Ã- Tanos M112 with Foam Insert. Minimum blade height for guard-lift operation: 36 mm (1.42). Âs ï¸ Safety Warning – CSC Fence System âs ï¸ When using fences longer than 625 mm (24.61), there is an increased risk of saw tipping. Failure to follow these guidelines may cause instability or reduced cutting accuracy. 1 mm (0.04) Setup Block. Proudly made in Britain by Benchdog Tools. SKU: BD1047 Size: 330mm.

]]> https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys-2/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/#comments Tue, 28 Jul 2026 05:57:47 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/










Need more than the quantity listed? Table Saw Miter Gauge with Micro Adjust Flip Stop and 13 Precision Angle Position Stops, Miter Gauge for Table Saw with 18 Inch Fence for Crosscut and Miters, Fits 3/8″ X 3/4″ Slot. 19.8 x 7.3 x 3.6 inches. 1 x Miter Gauge for Table Saw with 18 Inch Fence, 1 x User Manual. GOINGMAKE Miter Gauge with Micro Ajust Flip Stop and Upgrade Angle Adjust Stops. Micro Adjustable Flip Stop with Magnifier Glass. The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. The adjustment is smooth and fluid with minimal backlash. You can easily to read scales and adjust through micro adjust function and magnifier glass. With both mm and inch scales. Upgrade Angle Stops with Button and Precision Holes. Upgrade angle adjust stops with one simple button and position holes. Easy to pull up and rotate the button and turn the protractor. The pin locates angles precisely and lock security while you tighten the handle. Angle stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Easy to Set Up and Use. Easy to zero calibration and make you can get right 0 position on the miter gauge fence. And you can use the scales on the fence to cut any length you need, you do not have to use a tape and rulers. Zero Fit Miter Bar Fits for Most Table Saw. GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. Easily adjust to fits the slot and keep the bar perfectly aligned. Includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Micro Adjustable Flip Stop with Magnifier Glass? The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. Ensure accurate cutting every time. We also support square face and angle faces workpieces with locating pin. Upgrade Angle Stops with Button and Precision Holes? GOINGMAKE miter gauge is a must have table saw accessories for miter cuts and square cuts. Rapid, precision miter gauge adjustment-set exact angles quickly and accurately for flawless crosscuts and miter cuts. Provides a new precision angle adjust stops with one simple button and position holes. You can easily pull up and rotate the button and turn the protractor. The pin locates your angle you need precisely and lock angles security while you tighten the handle. Provides 13 accurate positive angle stops from -67.5-67.5° and a locking handles. Includes Angle Stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Easy to Set Up and Use? GOINGMAKE table saw miter gauge protractor is easy to set up and use. Multifunction micro adjust flip stop is easy to zero calibration and make you can get right 0 position on the miter gauge fence. You can change angles fast and accurate through positioning button and holes for miter cuts and square cuts. Precision 18 Inch Extruded with mm and inch Scales? GOINGMAKE miter gauge for table saw includes 18 inch precision extruded fence with mm and inch scales. After zero calibration, you do not have to go back to using a tape and rulers and you can get exact length according to the scales. Micro adjustable flip stop on fence make accurate adjust and magnifier glass on pointer make easy to read and align scales on miter gauge fence. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. The adjustable miter bars fits for most table saw. GOINGMAKE miter bars adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot and keep the bar perfectly aligned. No play on the miter slots and slides smooth ensure accurate cuts all the time. GOINGMAKE miter gauge is made of aluminum alloy and also includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. We’re committed to offering great deals on quality products you can trust. From home décor and garden essentials to tools, hardware, and pet accessories, there’s something for everyone at prices you’ll love. We do everything we can to ensure every customer is fully satisfied. If something is not right, send us a message and we will take care of it quickly.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/feed/ 0 https://tablesawfenceonline.com/viking-mountain-tool-works-27-position-precision-miter-gauge-with-24inch-600mm/ https://tablesawfenceonline.com/viking-mountain-tool-works-27-position-precision-miter-gauge-with-24inch-600mm/#comments Wed, 22 Jul 2026 05:36:44 +0000 https://tablesawfenceonline.com/viking-mountain-tool-works-27-position-precision-miter-gauge-with-24inch-600mm/










Viking Mountain Tool Works 27 Position Precision Miter Gauge With 24inch (600MM) in Fence and Stop for Table Saw Band Saws, Router Tables Sanders. With then Miter gage you get 27 Precision determined Stop Positions every 5 degrees from 0 to 60 degrees in both directions plus two additional at 22.5 degrees, useful for 8 sided Octagons. The miter bar is designed for a snug fit in Machines with a 3/4 by 3/8 inch miter slot. It will also work with a 3/43/8 inverted T slot. The fence mounting slots in the protractor head are designed to work with our 24 inch precision aluminum fence with stop, our 18 inch Box Joint Fence, or most commercially available fences available from other manufactures. Made from heavy gage Aluminum and steel. Includes Instructions for the miter gage as well as the two fence options. The Fence and Stop are substantial and well made 24 inch nominal (23.6 actual) by 3 inch high for great work support. The curser on the Stop allows for precise repeatable measurements. With this Miter gage you get 27 Precision determined Stop Positions (every 5 degrees from 0 to 60 degrees in both directions plus two additional at 22.5 degrees, useful for 8 sided Octagons). Unlike the stock miter gage that comes with most equipment, this gage is designed for precise repeatable angles after it is dialed into your machine. The Three inch by 24 inch precision fence. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.

]]> https://tablesawfenceonline.com/viking-mountain-tool-works-27-position-precision-miter-gauge-with-24inch-600mm/feed/ 0 https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys/ https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys/#comments Tue, 21 Jul 2026 05:33:42 +0000 https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys/









Benchdog Imperial CSC SYS Fence Kit – Precision Cross-Cut System with Flip Stops Â. If you own a Festool CSC SYS Table Saw, you know how challenging it can be to achieve accurate and repeatable cross-cuts. The Benchdog CSC SYS Fence Kit solves that problem with a precision-machined aluminum adaptor plate that allows you to securely attach Benchdog CSC Fences to your saw for flawless accuracy and consistency. Each fence features laser-engraved scale markings set at 1/16″ intervals and offset 1/16″ from the blade for safe, accurate referencing. With fence lengths available in 330 mm (12.99″), 625 mm (24.61″), and 990 mm (38.98), you can customize your setup for any project. The 625 mm (24.61″) and 990 mm (38.98″) kits include a material support plate with a dial-in thumbscrew for perfect workpiece alignment. Made from anodized aerospace-grade aluminum, this kit reflects Benchdog Tools’ commitment to producing precision woodworking tools built to last. Designed for the Festool CSC SYS Table Saw. Enables accurate, repeatable cross-cuts. Includes marked fences with laser scale and flag stops. Compatible with multiple fence lengths: 330 mm (12.99″) / 625 mm (24.61″) / 990 mm (38.98). Includes a material support plate and guard lifter. Precision-machined anodized aluminum adaptor plate. Proudly made in Britain. 330 mm (12.99) Fence Kit. 1 Ã- Machined Aluminum Adaptor Plate (Anodized Black). 1 Ã- Fence 330 mm (12.99). 1 Ã- Flag Stop (Red, Green, or Blue)Â. 1 Ã- 3D-Printed Guard Lifter. 2 Ã- Stainless Steel Thumbscrews. 2 Ã- M6 T-Nuts. 1 Ã- M6 Ã- 25 Thumbscrew. 1 Ã- M6 Calibration Screw with M6 T-Nut. 625 mm (24.61) Fence Kit. 1 Ã- Fence 625 mm (24.61). 1 Ã- Material Support Plate with Fixings. 990 mm (38.98) Fence Kit. 3 Ã- Fence Sections, each 330 mm (12.99). 1 Ã- Flag Stop (Red, Green, or Blue). 6 Ã- Joining Bars & Hex Key. 1 Ã- M6 Calibration Screw with M6 T-NUT. 990 mm (38.98) Fence SYS Kit. 1 Ã- Fence 990 mm (38.98) (supplied as 3 Ã- 330 mm sections). 3 Ã- Flag Stops Red, Green. 1 Ã- Tanos M112 with Foam Insert. Minimum blade height for guard-lift operation: 36 mm (1.42). Âs ï¸ Safety Warning – CSC Fence System âs ï¸ When using fences longer than 625 mm (24.61), there is an increased risk of saw tipping. Failure to follow these guidelines may cause instability or reduced cutting accuracy. 1 mm (0.04) Setup Block. Proudly made in Britain by Benchdog Tools. SKU: BD1045 Size: 625mm.

]]> https://tablesawfenceonline.com/benchdog-tools-imperial-precision-cross-cut-system-fence-kit-for-festool-csc-sys/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/#comments Sat, 18 Jul 2026 13:25:41 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/









Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Due to different lighting and screen settings, the item color may be slightly different from the picture. Due to different manual measurements, please allow a 1-2cm difference in size.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/#comments Wed, 15 Jul 2026 13:13:50 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/






Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/feed/ 0