https://tablesawfenceonline.com Fri, 18 Sep 2026 01:01:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjust-flip-stop-and-extentable-fence/ https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjust-flip-stop-and-extentable-fence/#comments Mon, 14 Sep 2026 16:49:42 +0000 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjust-flip-stop-and-extentable-fence/










GOINGMAKE Table Saw Miter Gauge with Micro Adjust Flip Stop and Extentable Fence from 18 to 32 Inch and 13 Angle Position Stops, Miter Gauge for Table Saw for Crosscut and Miters, Fit 3/8″ x 3/4″ Slot. GOINGMAKE miter gauge with Extendable Fence and Micro Adjust Flip Stop. Adjustable fence from 18-32 inch. Accuracy up to 0.001 inch with new micro adjust flip stop. Giving you an exact measurement to the stop. The fence includes mm and inch scales and you can easily read scales through the magnifier glass on the flip stops. Easy for miter cuts and square cuts. Upgrade Angle Stops with Button and Precision Holes. Precision angle stops with simple button and position holes. Easily pull up, rotate the button and turn the protractor. The pin locates the angle precisely and lock angles security while tighten the handle. Includes Angle: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Extendable Fence from 18 to 32 Inch with MM and Inch Scales. When you need the fence extended, you do not have to go back to using a tape and rulers. Just lock the flip stop on the mark of 16 inch on the main fence and set your dimension on 16 inch scale of the extension bar. And you can get exact extendable length according to the scales. Micro Adjustable Flip Stop with Magnifier Glass. The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. Ensure accurate cutting every time. The adjustment is smooth and fluid with minimal backlash. Easy to Set Up and Use. Multifunction micro adjust flip stop is easy to zero calibration and make you can get right 0 position on the miter gauge fence. And you can use the scales on the fence to cut any length you need, you do not have to use a tape and rulers. Zero Fit Miter Bar Fits for Most Table Saw. Adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot. No play on the miter slots and slides smooth ensure accurate cuts all the time. Sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Accurately for Crosscuts and Miter Cuts. Multifunctional flip stop and precision angle set up for precision square cuts and miter cuts. Extentable Aluminum Alloy Fence from 18 to 32 Inch? GOINGMAKE miter gauge for table saw includes the precision extruded fence extendable from 18 inch to 32 inch. Including mm and inch scales for your different needs. Micro adjustable flip stop on fence make accurate adjust and magnifier glass on pointer make easy to read and align scales on miter gauge fence. Micro Adjustable Flip Stop with Magnifier Glass? The micro adjustable flip stop of GOINGMAKE table saw miter gauge is rock-solid when locked and accuracy is up to 0.001. You can easily to read scales and adjust through micro adjust function and magnifier glass. We also support square face and angle faces workpieces with locating pin. Upgrade Angle Stops with Button and Precision Holes? GOINGMAKE miter gauge is a must have table saw accessories for miter cuts and square cuts. Rapid, precision miter gauge adjustment-set exact angles quickly and accurately for flawless crosscuts and miter cuts. Provides a new precision angle adjust stops with one simple button and position holes. You can easily pull up and rotate the button and turn the protractor. The pin locates your angle you need precisely and lock angles security while you tighten the handle. Provides 13 accurate positive angle stops from -67.5-67.5° and a locking handles. Includes Angle Stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. The adjustable miter bars fits for most table saw. GOINGMAKE miter bars adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot and keep the bar perfectly aligned. GOINGMAKE miter gauge is made of aluminum alloy and also includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Easy to Set Up and Use? GOINGMAKE table saw miter gauge protractor is easy to set up and use. You can change angles fast and accurate through positioning button and holes for miter cuts and square cuts. 19.8 x 7.4 x 3.7 inches. 1 x Miter Gauge for Table Saw with Extentable Fence, 1 x User Manual. 3.7 inches x 19.8 inches x 7.4 inches. Weight: 5.54 lb. We are always working hard to ensure your package arrives as soon as possible.

]]> https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjust-flip-stop-and-extentable-fence/feed/ 0 https://tablesawfenceonline.com/goingmake-compact-table-saw-miter-gauge-360mm-fence-flip-stop-fits-34x38/ https://tablesawfenceonline.com/goingmake-compact-table-saw-miter-gauge-360mm-fence-flip-stop-fits-34x38/#comments Mon, 31 Aug 2026 00:00:53 +0000 https://tablesawfenceonline.com/goingmake-compact-table-saw-miter-gauge-360mm-fence-flip-stop-fits-34x38/










GOINGMAKE Compact Table Saw Miter Gauge 360mm Fence Flip Stop Fits 3/4″x3/8″. This compact miter gauge fits most table saws with 3/4 inch by 3/8 inch slots and includes a 360mm fence with laser-etched inch and mi.

]]> https://tablesawfenceonline.com/goingmake-compact-table-saw-miter-gauge-360mm-fence-flip-stop-fits-34x38/feed/ 0 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/ https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/#comments Sat, 18 Jul 2026 05:24:39 +0000 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/







Precision Micro Adjustable Flip Stop? GOINGMAKE miter gauge for table saw ensures precision cross cutting and miter cut with our micro-adjustable fence stop. The micro adjustable flip stop is easy to use and the accuracy is up to 0.001 inch (0.0254 mm). GOINGMAKE versatile flip stop is solid and stable without shaking, ensuring accurate cutting all the time in woodworking or DIY. We also support square face and angle face workpieces with a locating pin. And you can easily read the scales with our magnifying glass. Fast Zero Calibration Feature for Quick Setup? GOINGMAKE miter gauge provides the fastest zero calibration with our zero adjust knob for easier quick zero setup. First, move the fence close to the table saw blade, and make sure there is a 1 to 3mm gap between the blade and fence. Second, slide the flip stop to touch the blade. Lastly, rotate the zero calibration knob to align the 0 scale. Fast and accurate zero setup without any other tools. So you can always make the precision cross cut and miter cut. And GOINGMAKE miter gauge can also prevent kickback when using table saw and it is safe to use. GOINGMAKE miter gauge table saw jig guide is a must-have table saw accessory. Fast and Accurate Angle Setup? GOINGMAKE table saw miter gauge protractor provides 11 accurate positive angle stop for quick angle set up for 90°, 60°, 45°, 30°, 22.5°, 15°, 0°, -60°, -45°, -30°, -22.5°, -15°. Easy to adjust with our fast and stable angle stop lock make sure lock angles securely in place. You can also cut an angle from -60°to 60° with the clear laser scales. Telescoping Miter Gauge Fence? GOINGMAKE miter gauge can support up to 36-inch crosscutting with our extendable miter gauge fence. Solid construction and stable extension system for precision adjustment. Our standard size is 19.5 inches for standard workpieces, and the size is more convenient for use. You can cut easily from 0 to 36 inches with an extendable fence. Includes mm and inch scales. We also provide a hidden flip stop for repeat cutting. There are 2 slots at the front of the fence, and you can add extra accessories and also add a sacrificial fence by yourself. Not included: sacrificial fence. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter bar includes an adjuster at the front, at the end and at the middle. Ensure stable, smooth, and fit sliding on the table saw slot. GOINGMAKE table saw guide is easy to adjust the ring to make perfect fitness between table saw and the miter gauge sliding bar. Our table saw angle guide fits for 3/8 x 3/4 inch T slot and U slot table saw band saw router table.

]]> https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/feed/ 0 https://tablesawfenceonline.com/goingmake-track-saw-parallel-guide-system-with-mirco-adjustable-flip-stop-and/ https://tablesawfenceonline.com/goingmake-track-saw-parallel-guide-system-with-mirco-adjustable-flip-stop-and/#comments Fri, 03 Jul 2026 20:31:44 +0000 https://tablesawfenceonline.com/goingmake-track-saw-parallel-guide-system-with-mirco-adjustable-flip-stop-and/









GOINGMAKE parallel guide for track saw provides precision micro adjustable flip stop with 0.001 inch(0.0254mm) adjust accuracy for advanced woodworking repeatable cuts. Ensure fast precision repeatable cuts from 0 to 53 inch(0-1350mm). Easy to set up and use with zero calibration knob. Including mm and inch scales system. Support both standard rip cuts and narrow rip cuts. GOINGMAKE parallel guide is a must-have tools and track saw accessories for track saw. Track saw with parallel guide is easier for breaking down sheet goods. Just like the rip fence on a table saw, GOINGMAKE parallel guide ensure every cut the same width without measuring and marking. Easier to make perfect parallel cuts to any sizes for a large full sheet of plywood instead of your table saw. GOINGMAKE parallel guide attaches to your guide rail security and positions the cutting line of your track saw perfectly parallel to the stock’s edge at the precise distance you need, providing identical cutting results every time. GOINGMAKE parallel guide system is compatible with Festool, Makita, Milwaukee, Triton, Powertec and WEN guide rails. GOINGMAKE parallel guide is also fits for GOINGMAKE large track saw square for perfect square crosscuts. ? Precision Micro Adjustable Flip Stop? GOINGMAKE parallel guide for track saw provides precision micro adjustable flip stop with 0.001 inch(0.0254mm) adjust accuracy for making woodworking repeatable cuts for your track saw. Easier to break down sheet goods and ensure dead-on consistency between cuts with accurate and solid flip stops. Package includes: 2 connect brackets, 8 t tracks, 2 flip stops, 12 t track connectors and 2 extension rods. Fast Accurate Repeatable Cuts? GOINGMAKE track saw parallel guide ensure fast precision repeatable cuts from 0 to 53 inch(0-1350mm). Track saw with parallel guide for breaking down sheet goods is just like the rip fence on a table saw, ensure every cut the same width without measuring and marking. GOINGMAKE parallel guide attaches to your guide rail security and positions the cutting line of your track saw perfectly parallel to the stock’s edge at the precise distance you need, support identical cutting results every time. Easy to Setup with Smart Zero Calibration Knob? GOINGMAKE parallel guide is easy to use. First, slide the connect inserts into track saw guide rails and locks in square and security. Second, connect the t track to the bracket until touch the edge of the bracket and lock the screws. Third, slide the flip stop into the t track and connect the calibration rod to the flip stops. Make sure the rods that you tighen the plastic head and tighen it to the flip stops. Last, move the flip stop and the plastic head to just touch the square ruler edge and rotate the zero calibration knob and move the scale indicator align the scale of 0 scale and the zero calibration is finished. Multiple Parallel Cuts Capability? GOINGMAKE parallel guides for track saw provides both independent imperial and mertric scale system. Including standard and narrow cuts scales. Clear laser scale and smart flip stop indicator with magnifier glass for easy reading and accurate align. Imperial scale system supports standard repeatable cuts from 12 inch to 53 inch and repetitive narrow rip cuts from 0 to 12 inch. Mertric scale system supports standard repeatable cuts from 300 to 1350mm and repetitive narrow rip cuts from 0 to 300mm. You can just use 1 to 4 tracks for different size and more flexible. Better woodworking cut and reduce errors. Versatile and Wide Compatibility? GOINGMAKE parallel guide is a must-have tools and track saw accessories for track saw. GOINGMAKE parallel guide for track saw is compatible with Festool, Makita, Milwaukee, Triton, Powertec and WEN guide rails.

]]> https://tablesawfenceonline.com/goingmake-track-saw-parallel-guide-system-with-mirco-adjustable-flip-stop-and/feed/ 0 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop/ https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop/#comments Mon, 20 Apr 2026 01:41:01 +0000 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop/











GOINGMAKE Table Saw Miter Gauge with Micro Adjustable Flip Stop and Extendable Fence and Quick Angle Stop for Table Saw Band Saw Router Table Fit 3/8 x 3/4 T Slot for Woodworking Crosscut, Miter Cut.

]]> https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop/feed/ 0 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable/ https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable/#comments Mon, 30 Mar 2026 08:27:41 +0000 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable/






CONDITION: open box like new – please see photos. Table Saw Miter Gauge with Micro Adjustable Flip Stop and Extendable Fence and Quick Angle Stop for Table Saw Band Saw Router Table Fit 3/8 x 3/4 T Slot for Woodworking Crosscut, Miter Cut. Precision micro-adjustable flip stop for repeatable cuts; accuracy up to 0.001 (0.0254mm). Fast zero-calibration knob for quick setup without extra tools (easy, accurate “zero” alignment). Built-in protractor with 11 positive stops: 90°, 60°, 45°, 30°, 22.5°, 15°, 0°, and negative stops down to -60°. Adjustable angle range: -60° to +60° with clear laser-etched scales and secure angle lock. Telescoping fence supports up to 36″ crosscuts (standard length 19.5″); inch/mm scales included. Hidden flip stop for repeat cuts; front slots for adding accessories or a sacrificial fence (not included). Zero-fit adjustable miter bar for smooth, no-play sliding; front/middle/rear adjusters. Fits most saw slots: 3/8″ x 3/4″ T-slot and U-slot (table saw, band saw, router table).

]]> https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable/feed/ 0 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new/ https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new/#comments Thu, 11 Dec 2025 19:05:42 +0000 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new/




Table Saw Miter Gauge with Micro Adjustable Flip Stop and Extendable Fence and Quick Angle Stop for Table Saw Band Saw Router Table Fit 3/8 x 3/4 T Slot for Woodworking Crosscut, Miter Cut. Item Weight? 11.62 pounds. Package Dimensions? 26 x 10 x 4 inches. Item model number? TSMG5ULTRA. Material? Aluminum Alloy, Metal. Item Package Quantity? 1. Included Components? 1 Set x GOINGMAKE Miter Gauge.

]]> https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new/feed/ 0