https://tablesawfenceonline.com Thu, 16 Apr 2026 17:26:59 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum-2/ https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum-2/#comments Sun, 01 Mar 2026 23:45:41 +0000 https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum-2/




POWERTEC Router Setup Blocks Woodworking 7PC Set, Router Depth Gauge, Aluminum Routers Setup Bars, Spacer Blocks, Height Gauge Set for Table Saw, Band Saw, Measuring Bars, 2 Sets, 71579-P2. 7 CONVENIENT SIZES: Our router setup blocks for woodworking includes 7pcs with the following sizes: (1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ & 1/2) and a durable protective storage case perfect to use for router tables, table saws and even shapers. PRECISE EFFICIENT SETUP: Using our router depth gauge set up blocks, to efficiently use your woodworking tool with high precision by eliminating the need for repeated test cuts and time consuming measurements with just a one time setup. MULTI USE DESIGN: Router table setup bars provides a 3 in 1 solution with gauges of step, depth and fence for various woodworking projects and multi function use on router tables, table saws & shapers while offering steps on top, bottom and ends. PREMIUM DURABLE ALUMINUM: Router setup bars are specifically made from premium grade anodized aluminum for maximum durability with prolonged use. Prevents saw blade and router bit damage during the setup process with high quality machined finish look. Each product is meticulously designed to exceed your needs and get projects done! Although we strive for 100% order fulfillment accuracy, mistakes happen. (We accept all kinds of credit cards). If you have any problems with your order, don’t hesitate to get in touch with us and we will do our best to meet your needs. Please allow us 24 hours to respond, although normally we respond sooner. Thank you for shopping at our store.

]]> https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum-2/feed/ 0 https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum/ https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum/#comments Tue, 20 Jan 2026 21:27:53 +0000 https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum/




POWERTEC Router Setup Blocks Woodworking 7PC Set, Router Depth Gauge, Aluminum Routers Setup Bars, Spacer Blocks, Height Gauge Set for Table Saw, Band Saw, Measuring Bars, 2 Sets, 71579-P2. 7 CONVENIENT SIZES: Our router setup blocks for woodworking includes 7pcs with the following sizes: (1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ & 1/2) and a durable protective storage case perfect to use for router tables, table saws and even shapers. PRECISE EFFICIENT SETUP: Using our router depth gauge set up blocks, to efficiently use your woodworking tool with high precision by eliminating the need for repeated test cuts and time consuming measurements with just a one time setup. MULTI USE DESIGN: Router table setup bars provides a 3 in 1 solution with gauges of step, depth and fence for various woodworking projects and multi function use on router tables, table saws & shapers while offering steps on top, bottom and ends. PREMIUM DURABLE ALUMINUM: Router setup bars are specifically made from premium grade anodized aluminum for maximum durability with prolonged use. Prevents saw blade and router bit damage during the setup process with high quality machined finish look. Each product is meticulously designed to exceed your needs and get projects done! Although we strive for 100% order fulfillment accuracy, mistakes happen. (We accept all kinds of credit cards). If you have any problems with your order, don’t hesitate to get in touch with us and we will do our best to meet your needs. Please allow us 24 hours to respond, although normally we respond sooner. Thank you for shopping at our store.

]]> https://tablesawfenceonline.com/powertec-router-setup-blocks-woodworking-7pc-set-router-depth-gauge-aluminum/feed/ 0 https://tablesawfenceonline.com/craftsman-152-table-saw-miter-gauge-cross-cut-fence-or91078-depth-stop-or91087/ https://tablesawfenceonline.com/craftsman-152-table-saw-miter-gauge-cross-cut-fence-or91078-depth-stop-or91087/#comments Fri, 28 Feb 2025 04:45:39 +0000 https://tablesawfenceonline.com/craftsman-152-table-saw-miter-gauge-cross-cut-fence-or91078-depth-stop-or91087/











Fence portion only (miter itself NOT included), exactly as shown. Fits the 152 miter which matches this item. For even more table saw parts!

]]> https://tablesawfenceonline.com/craftsman-152-table-saw-miter-gauge-cross-cut-fence-or91078-depth-stop-or91087/feed/ 0 https://tablesawfenceonline.com/wen-benchtop-jobsite-table-saw-11-amp-8-25-in-4500-rpm-compact-adjustable-depth/ https://tablesawfenceonline.com/wen-benchtop-jobsite-table-saw-11-amp-8-25-in-4500-rpm-compact-adjustable-depth/#comments Sat, 13 Jul 2024 22:05:24 +0000 https://tablesawfenceonline.com/wen-benchtop-jobsite-table-saw-11-amp-8-25-in-4500-rpm-compact-adjustable-depth/











Benchtop table saw features a 25-inch rip capacity. Features an 8.25-inch 24-tooth carbide tipped table saw blade. Includes rip fence, miter gauge, push stick, and 11-amp motor. Remember when you had the power of a table saw whenever and wherever you needed it. The WEN 11 Amp 8.25 in. Benchtop Table Saw provides a compact and portable solution for sawing straight, long cuts on larger workpieces. Our spacious table extends out for a rip-cut capacity of up to 25 in. Perfect for ripping 4×8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 2.75 in. The angle of the blade can also be adjusted for bevel cuts up to 2 in. The tool-free blade guard can be easily installed or removed as needed, while the extension arm increases the 18.9 in. X 18.4 in. Table all the way out to 18.9 in. The compact housing measures in with a footprint of a mere 15.5 in. And includes a side carrying handle for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes an 8.25 in. TCT 24T blade with 5/8 in. Arbor, an adjustable rip fence, an auxiliary fence for workpieces less than 1/10 of an inch thick, a miter gauge, a push stick, a dust port adapter, a riving knife to limit kickback and onboard storage for easy organization. Amperage (A): 11 A. Bench & Stationary Tool Type: Table Saw. Corded Tool Type: Table Saw. Horsepower (HP): 1.8 hp. Included Accessories: Blade Guard System. Maximum Cut Depth at 45 Degrees in. Maximum Cut Depth at 90 Degrees in. Maximum Speed (RPM): 4500 RPM. Maximum Table Tilt – Left (degrees): 45 °. Maximum Table Tilt – Right (degrees): 45 °. Power Tool Features: Compact. Rip Capacity – Left in. Rip Capacity – Right in. Tools Product Type: Other. Work Table Surface in. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.

]]> https://tablesawfenceonline.com/wen-benchtop-jobsite-table-saw-11-amp-8-25-in-4500-rpm-compact-adjustable-depth/feed/ 0 https://tablesawfenceonline.com/10-woodworking-bandsaw-with-cast-table-fence-blade-120mm-cutting-depth/ https://tablesawfenceonline.com/10-woodworking-bandsaw-with-cast-table-fence-blade-120mm-cutting-depth/#comments Wed, 01 Jul 2020 21:34:03 +0000 http://tablesawfenceonline.com/10-woodworking-bandsaw-with-cast-table-fence-blade-120mm-cutting-depth/













10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). 1 × Base Frame. 1 × Machine Worktable. 1 × Push Stick. 1 × Parallel Stop. Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. We now have warehouses in Germany. Note: American regional AK, HI, PR , are remote areas, these places need to be extra charged. F your address is too remote to achieve, there will an extra remote surcharge occurs. Please also pay attention to that, thanks. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. 220V 30MPa Air Compressor Pump PCP Electric High Pressure System Rifle EU Stock. 3KW Steam Generator Multi-Functional Sauna Bath Home SPA Shower Bathroom Cabinet. Good 5 pcs 3/8 Holder Mini Lathe Set & Indexable Carbide C6 Insert Tool Bit NEW. 34 Stainless Steel Pet Dog Cat Bathing Wash Shower Grooming Bath Tub w/Stairs. 220V 320mm Digital Vacuum Packing Sealing Machine Sealer Commercial Food Chamber. 2.2KW ER20 Water Cooled Spindle Motor & Matching Frequency Inverter Total 1 set. The item “10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth” is in sale since Wednesday, July 1, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “lakago-life” and is located in Prague. This item can be shipped worldwide.

• Blade Length: 70.5in
• Blade Speed: 11m/s(660-960m/min)
• Blade Width: 0.24-0.51in
• Brand: lakago
• Colour: Green
• Country/Region of Manufacture: China
• G.W.: 68lbs
• LPA Sound Pressure Level: 92.7 dB(A)
• LWA Sound Power Level: 102.3 dB(A)
• N.W.: 66.13lbs
• Package Size: 35×17.7×13.8in
• Power Source: Corded Electric
• Processing Scope Max. Height: 4.7in
• Processing Scope Max. Width: 9.6in
• Rated Input Power: 420W
• Saw Specification: 1790×6-13mm
• Saw Wheel Dia.: 10in
• Set Includes: Blades
• Suitable For: Wood
• Type: Table Saw
• Voltage: 220 50Hz
• Working Mode: Semi-Auto
• Worktable Size: 11.8×11.8in
• Worktable Tilt: 0-45°

]]> https://tablesawfenceonline.com/10-woodworking-bandsaw-with-cast-table-fence-blade-120mm-cutting-depth/feed/ 0 https://tablesawfenceonline.com/incra-ig32-center-finder-marking-depth-and-fence-alignment-gauge/ https://tablesawfenceonline.com/incra-ig32-center-finder-marking-depth-and-fence-alignment-gauge/#comments Wed, 05 Feb 2020 07:51:54 +0000 http://tablesawfenceonline.com/incra-ig32-center-finder-marking-depth-and-fence-alignment-gauge/




INCRA IG32 Center Finder, Marking, Depth and Fence Alignment Gauge. New and unused but box is scruffy. Quickly And Accurately Mark Out Reference Lines On Any Work piece. This Marking Gauge Can Be Used In Place Of A Ruler Or Adjustable Square. Precision Cast Saw Tooth Rack Locks The Gauge In At Exact 1/32 Steps. Made Of High-Impact Plastic. This precision marking and measuring gauge is one of those gadgets that you absolutely can’t get along without once you have used it the first time. Featuring INCRA’s Patented Sawtooth Positioning Racks, it can be instantly set to any position without measuring. Its many uses include a precision measuring and marking gauge, a freestanding depth-of-cut gauge, a fence alignment gauge and a center finder. Positioning range is 7. The item “INCRA IG32 Center Finder, Marking, Depth and Fence Alignment Gauge” is in sale since Monday, February 3, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “hannahblotski” and is located in Walmington-on-Sea. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay.

• Type: Gauge
• MPN: Does not apply
• Application: Wood Working Tool
• Brand: Incra

]]> https://tablesawfenceonline.com/incra-ig32-center-finder-marking-depth-and-fence-alignment-gauge/feed/ 0 https://tablesawfenceonline.com/aluminum-router-circular-radial-table-saw-height-depth-gauge-fence-set-guage/ https://tablesawfenceonline.com/aluminum-router-circular-radial-table-saw-height-depth-gauge-fence-set-guage/#comments Fri, 27 Apr 2018 02:01:15 +0000 http://tablesawfenceonline.com/aluminum-router-circular-radial-table-saw-height-depth-gauge-fence-set-guage/



Aluminum Router, Circular, Radial & Table Saw Height Depth Gauge Fence Set Guage. TAKE THE GUESSWORK OUT WHILE SPEEDING UP YOUR SETUP TIME! A dado or groove that’s too deep can jeopardize the strength and ruin the appearance of a joint. This handy gauge eliminates these problems by providing accurate settings in an instant. Just rest the gauge’s feet on your router’s base or your router table insert and move the appropriate notch over the tip of your bit to make your setting. Graduated in 1/16-inch increments from 1/8-inch to 1-inch. Can also be used to set saw blade depths up to 1-inch. Made from solid billet aluminum. Please use the new -add to cart- feature to compile multiple items. This will ensure that the combined discount is automatically deducted. Sometimes when items have different classes of service the calculator cannot combine them so it would make sense to request a total. The item “Aluminum Router, Circular, Radial & Table Saw Height Depth Gauge Fence Set Guage” is in sale since Wednesday, December 07, 2016. This item is in the category “Home & Garden\Tools\Measuring & Layout Tools\Measuring Tapes & Rulers”. The seller is “duro_tools” and is located in Middletown, Connecticut. This item can be shipped worldwide.

• Brand: Unbranded
• MPN: Does not apply

]]> https://tablesawfenceonline.com/aluminum-router-circular-radial-table-saw-height-depth-gauge-fence-set-guage/feed/ 0