https://tablesawfenceonline.com Wed, 06 May 2026 10:59:51 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/#comments Tue, 14 Apr 2026 17:18:56 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/








Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at, 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-12/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-12/#comments Sat, 28 Mar 2026 08:21:44 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-12/








Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at, 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-12/feed/ 0 https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-end-3/ https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-end-3/#comments Tue, 17 Mar 2026 07:44:25 +0000 https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-end-3/







The Aluminum Miter fence with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. Steel miter bar measures 17 in length & is. Standard slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from brand to brand) running the length on the bottom of slot. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. Both ends of the fence are cut at 45 degrees. This allows you to position the fence extra close to the blade (with the power turned off) so you have more control over the workpiece. Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop. We’ve all done the research or at the very least heard about miter gauges with fence systems that are very accurate, easy to adjust and make cross cutting angles on your table saw super easy. While that all sounds great, all those great features usually costs a lot. That is until now! The Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop comes packed with all those great features and more. The best part is that it is reasonably priced so that most any woodworker can afford it! Be Precise with Ease. If you have ever used a factory supplied miter gauge, then you know how limiting it can be. The Fulton Miter Gauge with Aluminum Fence and Stop makes the angle cutting process a breeze. Once the gauge is set and the fence is properly adjusted, cross cutting angles on your table saw just became a whole lot easier than just using a miter gauge by itself. When this aluminum fence is used with the Fulton Miter Gauge, you’ll be able to repetitively cut angle stock all day long with precise results! When designing the fence for this system we kept having the same issue happen over and over again. The standard 90 degree end on most miter gauge fences made the fence to saw blade gap too large and the wood kept binding in that gap. Our solution was to simply cut the fence ends at a 45 degree angle so that the fence can get as close as possible to the blade with minimal stock over hang. This helps prevent binding and produces a much cleaner cut. Convenient Aluminum Flip Stop. Included with the fence and miter gauge is a convenient flip stop for making repetitive cuts. Simply slide the flip stop to the exact position you need it to be, lock it in place and you’re ready to go! When the stop is not needed you can either remove from the fence or simply lift the stop upwards and out of the way until it is needed. Accurate and Easy to Adjust. The Fulton Miter Gauge is loaded with great features. One of the more prominent features are the positive stops that are set to the most common angles used by woodworkers. Simply loosen the handle by rotating it counter clockwise, pull the spring loaded pin lock up and and adjust the miter gauge to the desired angle. Once you find your positive stop angle, release the lock pin so it locks the angle in place and re-secure the handle by rotating int clockwise until it is snug. If you want to use an angle that is not one of the positive stops, the pin lock can be pulled upward and rotated so that it won’t engage any of the positive stop holes. This allows you to adjust the miter gauge to any angle you need. Left Side, Right Side or Even Upside Down.. For the most part, we tend to cut on one side of our table saw the majority of the time. It usually depends on the saw or just simply preference. This is why we included two different sticky back (PSA pressure sensitive adhesive) tapes so you can choose which direction you need. We also know that some of use like to do things a little differently. If you are looking down at your miter fence from above then it may make sense for some of us to place the tape on to the aluminum fence upside down in relation to the miter gauge. This allows for you to be able to clearly read the measurements on the tape. Standard Size Miter Bar 3/4″ x 3/8″. The steel miter bar is mounted to the miter gauge and is the industry standard of 3/4″ x 3/8″. This means it will fit into most table slot miter slots. The miter bar also features spring loaded plungers that can be adjusted (with a hex key wrench) for just the right fit so you have a smooth push through every time.

]]> https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-end-3/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-11/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-11/#comments Tue, 10 Mar 2026 23:20:43 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-11/








Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at, 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-11/feed/ 0 https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled/ https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled/#comments Sun, 15 Feb 2026 23:00:42 +0000 https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled/







Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 Degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Aluminum Miter fence with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. Steel miter bar measures 17 in length & is. Standard slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from brand to brand) running the length on the bottom of slot. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. Both ends of the fence are cut at 45 degrees. This allows you to position the fence extra close to the blade (with the power turned off) so you have more control over the workpiece. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.

]]> https://tablesawfenceonline.com/fulton-precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled/feed/ 0 https://tablesawfenceonline.com/pro-aluminum-miter-gauge-fence-fulton-precision-45-angled-ends-accurate-cuts/ https://tablesawfenceonline.com/pro-aluminum-miter-gauge-fence-fulton-precision-45-angled-ends-accurate-cuts/#comments Thu, 15 Jan 2026 05:09:44 +0000 https://tablesawfenceonline.com/pro-aluminum-miter-gauge-fence-fulton-precision-45-angled-ends-accurate-cuts/









Pro Aluminum Miter Gauge Fence, Fulton Precision, 45° Angled Ends, Accurate Cuts. Pro Aluminum Miter Gauge Fence. Experience the pinnacle of precision cutting with the Pro Aluminum Miter Gauge Fence, designed to elevate your woodworking projects to an unparalleled level of sophistication and accuracy. Crafted from a solid piece of extruded aluminum for unmatched durability. 45° angled ends provide superior support for your workpieces. Adjustable solid aluminum head. 200 thick, featuring 13 positive stop holes for precision cutting. Angles include 22.5°, 30°, 45°, 60°, 67.5°, and a 90° stop, ensuring versatility in your projects. Steel miter bar measures 17 in length and. 730 wide, compatible with most saws. Standard slots of 3/4″ x 3/8″ and a 1/8″ “T slot running the length of the bottom enhance stability and ease of use. Reduces setup time allowing you to focus on your craft. Ensures accurate cuts with its thoughtfully engineered design. Offers enhanced control over the workpiece with the ability to position the fence close to the blade. Durable construction promises longevity and reliability. Designed for compatibility, seamlessly mounts to most miter gauges. Why choose our Pro Aluminum Miter Gauge Fence? For the discerning craftsman who demands nothing less than perfection, the Pro Aluminum Miter Gauge Fence presents an opportunity to achieve unparalleled accuracy and control in all your woodworking endeavors. This finely crafted tool not only enhances your workspace but elevates the quality of your finished projects. Invest in precision-choose the Pro Aluminum Miter Gauge Fence and transform your cutting experience today! Alternative Carriers – We may use alternative carriers e. To ensure your package arrives safely and on time. Your feedback is extremely important to us. We strive to provide the best products and customer service possible. We are committed to resolving any problems and ensuring your satisfaction. Item Weight: 2.5 Pounds.

]]> https://tablesawfenceonline.com/pro-aluminum-miter-gauge-fence-fulton-precision-45-angled-ends-accurate-cuts/feed/ 0 https://tablesawfenceonline.com/precision-miter-fence-with-45-angled-ends/ https://tablesawfenceonline.com/precision-miter-fence-with-45-angled-ends/#comments Mon, 05 Jan 2026 04:34:42 +0000 https://tablesawfenceonline.com/precision-miter-fence-with-45-angled-ends/









Precision Miter Fence w/ 45° Angled Ends. Precision Miter Fence with 45° Angled Ends. Transform your woodworking experience with our Precision Miter Fence, meticulously designed to enhance precision, safety, and efficiency in every cut. Aluminum construction with 45-degree angled ends for unparalleled workpiece support. Universal compatibility – suitable for mounting to most miter gauges. 200 thick, adjustable, solid aluminum head featuring 13 positive stop holes. Positive stops include 1 hole at 90 degrees, and 6 holes on both sides at 22.5°, 30°, 45°, 60°, 67.5°, and 90°. Robust steel miter bar, measuring 17 long and. Standard slots of 3/4″ x 3/8″ with a 1/8″ “T slot for versatile applications. Constructed from a single piece of extruded aluminum ensuring durability and accuracy. 45-degree cut ends allow closer positioning to the blade, ensuring more control over the workpiece. Enhances precision and accuracy in all your cuts. Saves setup time, allowing you to focus on your craftsmanship. Durable construction leads to long-lasting performance. Provides exceptional stability, making your woodworking projects safer and more manageable. Versatile design adapts to various woodworking tasks and projects. Why choose our Precision Miter Fence? Every woodworker knows that precision is key to success. With our Precision Miter Fence, you’re investing in a tool that guarantees perfect cuts and enhanced productivity. Its unique design permits greater control and control over your workpiece, making it an essential addition to your workshop. Upgrade your woodworking toolbox with the Precision Miter Fence today and experience the elegance of flawless craftsmanship. Alternative Carriers – We may use alternative carriers e. To ensure your package arrives safely and on time. We do not accept return on most products. All sales are final. Your feedback is extremely important to us. We strive to provide the best products and customer service possible. We are committed to resolving any problems and ensuring your satisfaction. Item Weight: 2.5 lb. Suitable For: Metal, Plastic, Wood. Number of Items in Set: 1. Number of Batteries: 0.

]]> https://tablesawfenceonline.com/precision-miter-fence-with-45-angled-ends/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-aluminum-fence-45-angled-ends-repetitive-cuts/ https://tablesawfenceonline.com/precision-miter-gauge-aluminum-fence-45-angled-ends-repetitive-cuts/#comments Thu, 25 Dec 2025 11:58:46 +0000 https://tablesawfenceonline.com/precision-miter-gauge-aluminum-fence-45-angled-ends-repetitive-cuts/









Precision Miter Gauge Aluminum Fence 45° Angled Ends Repetitive Cuts. Precision Miter Gauge Aluminum Fence. Designed for perfection, this Precision Miter Gauge Aluminum Fence offers unmatched capabilities for creating accurate and repeatable cuts in your woodworking projects. With its elegant aluminum construction and 45° angled ends, it ensures superior workpiece support, providing you with the ultimate precision you deserve. Unsurpassed Workpiece Support: 45° ends allow for closer positioning to the blade, enhancing control over your workpiece. Durable Construction: Made from a single piece of extruded aluminum, this miter gauge fence is built to withstand the rigors of daily use. Adjustable Solid Aluminum Head: With a thickness of. 200, it features 13 precision machined positive stop holes for versatility. Positive Stop Holes: Includes one hole at 90 degrees and six additional holes at various angles: 22.5°, 30°, 45°, 60°, 67.5° for effortless adjustments. Steel Miter Bar: Measuring 17 in length with dimensions of. 730″, it is compatible with standard slots of 3/4″ x 3/8″ and includes a 1/8″ “T” slot underneath. Ensures accurate and smooth cuts with ease. Reduces setup time, allowing you to focus on completing your projects. Versatile and compatible with most miter gauges. Enhances control and precision, crucial for intricate cuts. Why Choose Our Precision Miter Gauge Aluminum Fence? Elevate your woodworking experience with our Precision Miter Gauge Aluminum Fence. Crafted for accuracy and built for durability, this miter gauge is the ideal companion for both amateur and seasoned craftsmen alike. Its user-friendly design allows for adjustments with unmatched ease, ensuring that every cut is executed to perfection. Why settle for less? Invest in the tool that brings precision and excellence to your craftsmanship. Order your Precision Miter Gauge Aluminum Fence today and take your projects to new heights! Alternative Carriers – We may use alternative carriers e. To ensure your package arrives safely and on time. Your feedback is extremely important to us. We strive to provide the best products and customer service possible. We are committed to resolving any problems and ensuring your satisfaction. Item Weight: 2.5 Pounds.

]]> https://tablesawfenceonline.com/precision-miter-gauge-aluminum-fence-45-angled-ends-repetitive-cuts/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-10/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-10/#comments Sat, 20 Dec 2025 03:40:42 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-10/








Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at, 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-10/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-9/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-9/#comments Mon, 17 Nov 2025 17:32:47 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-9/








Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at, 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-9/feed/ 0