https://tablesawfenceonline.com Sat, 15 Aug 2026 23:12:44 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/#comments Mon, 10 Aug 2026 06:48:38 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/






Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-7/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/ https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/#comments Fri, 31 Jul 2026 14:10:42 +0000 https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/









Need more than the quantity listed? 71391 Table Saw Precision Miter Gauge System W/ 27 Angle Stops and 3/4″X 3/8″T-Slotted Miter Bar W/Removable T-Slot Plate; Includes 24″X 3″ Multi T-Track Fence W/Scale, T-Track Flip Stop. Other Special Features of the Product. High precision miter gauge with 1-degree step spacing, 27 angle stops, multi-track fence, miter saw flip stop, and compatibility with table saws. Item Dimensions L x W x H. 4.62″L x 3.37″W x 25H. Table Saw Precision Miter Gauge System with 27 Angle Stops. Global Trade Identification Number. 71391 Table Saw Precision Miter Gauge System 24″ x 3″ multi -track fence with 27 Angle Stops. Introducing the Table Saw Precision Miter Gauge System by POWERTEC. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops that do not require calibration. Set Contains the Following: (1) High Precision Miter Gauge, (1) Multi Track Fence with Laser Engraved Scale (24 inch long by x 3 inch tall), (1) 3 T-Track Flip Stop (multi position). Miter Gauge Features 27 angle indexing stops, Laser-cut aluminum construction, A multi-functional 45 Degree setting, 4 expansion discs that adjust to remove all side play. A removable T-slot plate that can be used with T-slotted miter slots. Works in standard 3/4″ x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence Fence. Features Laser engraved 24″ scale, right to left 24″ x 3 tall multi-track T-slots (fence section). Made out of anodized extruded aluminum for strength and durability Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts, and T-track accessories. Possesses optimal versatility as a miter gauge fence, router or shaper table saw miter gauge fence and table saw sub-fence, chop or radial arm saw fence. Flip Stop Features can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16) puts the control in your hands allowing you to use the included aluminum T-track fence or a custom built sacrificial fence. Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop. Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results. High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30°and 45°and nine others, both left and right Works in standard 3/4″ x 3/8″ miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8 miter slots. Multi-track miter fence: smooth, built-in laser engraved measuring scale, extruded aluminum profile with a universal design that accepts accept 1/4″-20 hex Bots, 1/4″ t-bolts and 5/16 T- bolts, and T-track accessories. Miter saw flip stop: delivers exceptional cut-length control, with a toolless locking mechanism and adjustable settings to quick change to the left or right side of the blade. We’re committed to offering great deals on quality products you can trust. From home décor and garden essentials to tools, hardware, and pet accessories, there’s something for everyone at prices you’ll love. We do everything we can to ensure every customer is fully satisfied. If something is not right, send us a message and we will take care of it quickly.

]]> https://tablesawfenceonline.com/precision-miter-gauge-system-with-t-slot-bar-multi-t-track-fence/feed/ 0 https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/ https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/#comments Wed, 29 Jul 2026 22:02:41 +0000 https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/










Need more than the quantity listed? Table Saw Miter Gauge with Micro Adjust Flip Stop and Extentable Fence from 18 to 32 Inch and 13 Angle Position Stops, Miter Gauge for Table Saw for Crosscut and Miters, Fit 3/8″ X 3/4″ Slot. 19.8 x 7.4 x 3.7 inches. 1 x Miter Gauge for Table Saw with Extentable Fence, 1 x User Manual. GOINGMAKE miter gauge with Extendable Fence and Micro Adjust Flip Stop. Adjustable fence from 18-32 inch. Accuracy up to 0.001 inch with new micro adjust flip stop. Giving you an exact measurement to the stop. The fence includes mm and inch scales and you can easily read scales through the magnifier glass on the flip stops. Easy for miter cuts and square cuts. Upgrade Angle Stops with Button and Precision Holes. Precision angle stops with simple button and position holes. Easily pull up, rotate the button and turn the protractor. The pin locates the angle precisely and lock angles security while tighten the handle. Includes Angle: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Extendable Fence from 18 to 32 Inch with MM and Inch Scales. When you need the fence extended, you do not have to go back to using a tape and rulers. Just lock the flip stop on the mark of 16 inch on the main fence and set your dimension on 16 inch scale of the extension bar. And you can get exact extendable length according to the scales. Micro Adjustable Flip Stop with Magnifier Glass. The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. Ensure accurate cutting every time. The adjustment is smooth and fluid with minimal backlash. Easy to Set Up and Use. Multifunction micro adjust flip stop is easy to zero calibration and make you can get right 0 position on the miter gauge fence. And you can use the scales on the fence to cut any length you need, you do not have to use a tape and rulers. Zero Fit Miter Bar Fits for Most Table Saw. Adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot. No play on the miter slots and slides smooth ensure accurate cuts all the time. Sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Accurately for Crosscuts and Miter Cuts. Multifunctional flip stop and precision angle set up for precision square cuts and miter cuts. Extentable Aluminum Alloy Fence from 18 to 32 Inch? GOINGMAKE miter gauge for table saw includes the precision extruded fence extendable from 18 inch to 32 inch. Including mm and inch scales for your different needs. Micro adjustable flip stop on fence make accurate adjust and magnifier glass on pointer make easy to read and align scales on miter gauge fence. Micro Adjustable Flip Stop with Magnifier Glass? The micro adjustable flip stop of GOINGMAKE table saw miter gauge is rock-solid when locked and accuracy is up to 0.001. You can easily to read scales and adjust through micro adjust function and magnifier glass. We also support square face and angle faces workpieces with locating pin. Upgrade Angle Stops with Button and Precision Holes? GOINGMAKE miter gauge is a must have table saw accessories for miter cuts and square cuts. Rapid, precision miter gauge adjustment-set exact angles quickly and accurately for flawless crosscuts and miter cuts. Provides a new precision angle adjust stops with one simple button and position holes. You can easily pull up and rotate the button and turn the protractor. The pin locates your angle you need precisely and lock angles security while you tighten the handle. Provides 13 accurate positive angle stops from -67.5-67.5° and a locking handles. Includes Angle Stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. The adjustable miter bars fits for most table saw. GOINGMAKE miter bars adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot and keep the bar perfectly aligned. GOINGMAKE miter gauge is made of aluminum alloy and also includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Easy to Set Up and Use? GOINGMAKE table saw miter gauge protractor is easy to set up and use. You can change angles fast and accurate through positioning button and holes for miter cuts and square cuts. We’re committed to offering great deals on quality products you can trust. From home décor and garden essentials to tools, hardware, and pet accessories, there’s something for everyone at prices you’ll love. We do everything we can to ensure every customer is fully satisfied. If something is not right, send us a message and we will take care of it quickly.

]]> https://tablesawfenceonline.com/precision-table-saw-miter-gauge-with-adjustable-flip-stop-and-fence/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/#comments Wed, 29 Jul 2026 14:01:45 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/











Precision Miter Gauge with Aluminum Fence. Elevate your woodworking experience with our Precision Miter Gauge, designed to meet the highest standards of quality and performance. Crafted from steel plate, this versatile tool is the economical solution for your table saw cross cutting needs. Made from high-quality steel plate for durability and exceptional performance. Aluminum miter fence with 45-degree ends offers superior workpiece support. Handy aluminum flip stop for repetitive angled cuts, enhancing your productivity. Thick, adjustable solid aluminum head with 120 positive stop holes for precise angles. 27 Angle Stops with 5-Degree Increments for unmatched accuracy; laser marking technology ensures friction-resistance during use. Metric scale on miter gauge fence for easy measurements. Integrated tenoning function, allowing for customized board sizes. Universal fence mounting bracket and pivoting locking mechanism provide flexibility during setup. Removable plate enables compatibility with T-slotted and non T-slotted miter slots. Equipped with an adjustable expansion disc and removable retaining disc for precise positioning. Why Choose Our Precision Miter Gauge? Crafted for woodworking aficionados, this miter gauge is made of a single piece of extruded aluminum, promising durability and precise tracking. The uniquely designed 45-degree ends allow for close positioning to the saw blade, giving you unparalleled control over your workpiece. Free yourself from the constraints of inferior tools and elevate every cut with accuracy and ease. Whether you’re a seasoned professional or a passionate DIY enthusiast, our Precision Miter Gauge is the perfect addition to your workshop. Embrace your creativity and enhance the efficiency of your projects – order now and redefine perfection in woodworking! Item Weight: 8.8 ounces. Item Diameter: 1 x 1 x 1 inches. Suitable For: Metal, Plastic, Wood. Set Includes: Case, aluminum table saw miter gauge, aluminum miter fence, aluminum flip stop, curve ruler. Number of Items in Set: 1. Number of Batteries: 0.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-fence/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/#comments Tue, 28 Jul 2026 05:57:47 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/










Need more than the quantity listed? Table Saw Miter Gauge with Micro Adjust Flip Stop and 13 Precision Angle Position Stops, Miter Gauge for Table Saw with 18 Inch Fence for Crosscut and Miters, Fits 3/8″ X 3/4″ Slot. 19.8 x 7.3 x 3.6 inches. 1 x Miter Gauge for Table Saw with 18 Inch Fence, 1 x User Manual. GOINGMAKE Miter Gauge with Micro Ajust Flip Stop and Upgrade Angle Adjust Stops. Micro Adjustable Flip Stop with Magnifier Glass. The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. The adjustment is smooth and fluid with minimal backlash. You can easily to read scales and adjust through micro adjust function and magnifier glass. With both mm and inch scales. Upgrade Angle Stops with Button and Precision Holes. Upgrade angle adjust stops with one simple button and position holes. Easy to pull up and rotate the button and turn the protractor. The pin locates angles precisely and lock security while you tighten the handle. Angle stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Easy to Set Up and Use. Easy to zero calibration and make you can get right 0 position on the miter gauge fence. And you can use the scales on the fence to cut any length you need, you do not have to use a tape and rulers. Zero Fit Miter Bar Fits for Most Table Saw. GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. Easily adjust to fits the slot and keep the bar perfectly aligned. Includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. Micro Adjustable Flip Stop with Magnifier Glass? The micro adjustable flip stop of GOINGMAKE miter gauge is rock-solid when locked and accuracy is up to 0.001. Ensure accurate cutting every time. We also support square face and angle faces workpieces with locating pin. Upgrade Angle Stops with Button and Precision Holes? GOINGMAKE miter gauge is a must have table saw accessories for miter cuts and square cuts. Rapid, precision miter gauge adjustment-set exact angles quickly and accurately for flawless crosscuts and miter cuts. Provides a new precision angle adjust stops with one simple button and position holes. You can easily pull up and rotate the button and turn the protractor. The pin locates your angle you need precisely and lock angles security while you tighten the handle. Provides 13 accurate positive angle stops from -67.5-67.5° and a locking handles. Includes Angle Stops: 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15°, 0°, -67.5°, -60°, -45°, -30°, -22.5°, -15°. Easy to Set Up and Use? GOINGMAKE table saw miter gauge protractor is easy to set up and use. Multifunction micro adjust flip stop is easy to zero calibration and make you can get right 0 position on the miter gauge fence. You can change angles fast and accurate through positioning button and holes for miter cuts and square cuts. Precision 18 Inch Extruded with mm and inch Scales? GOINGMAKE miter gauge for table saw includes 18 inch precision extruded fence with mm and inch scales. After zero calibration, you do not have to go back to using a tape and rulers and you can get exact length according to the scales. Micro adjustable flip stop on fence make accurate adjust and magnifier glass on pointer make easy to read and align scales on miter gauge fence. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter gauge for table saw fits standard 3/8″ x 3/4″ T slot and U slot. The adjustable miter bars fits for most table saw. GOINGMAKE miter bars adapts to any table saw with a 3/8″ x 3/4″ miter slot. The 4 adjustable rings can easily adjust to fits the slot and keep the bar perfectly aligned. No play on the miter slots and slides smooth ensure accurate cuts all the time. GOINGMAKE miter gauge is made of aluminum alloy and also includes a sliding pad on the back for smooth sliding on table top and prevents damage from table saw tops. We’re committed to offering great deals on quality products you can trust. From home décor and garden essentials to tools, hardware, and pet accessories, there’s something for everyone at prices you’ll love. We do everything we can to ensure every customer is fully satisfied. If something is not right, send us a message and we will take care of it quickly.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-with-micro-adjust-18-fence/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/#comments Sat, 18 Jul 2026 13:25:41 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/









Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Due to different lighting and screen settings, the item color may be slightly different from the picture. Due to different manual measurements, please allow a 1-2cm difference in size.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/#comments Wed, 15 Jul 2026 13:13:50 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/






Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-6/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-5/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-5/#comments Sun, 26 Apr 2026 02:03:41 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-5/


H-Precision Multi-Angle Adjustable Woodworking Backrest Handle for Saw Table Carving Machines by Fengsen Tools (DIY Modification). Applications: Suitable for table saws and routers.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-5/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-system-for-table-saw-kit-withtelescoping-fence-11-prese-12/ https://tablesawfenceonline.com/precision-miter-gauge-system-for-table-saw-kit-withtelescoping-fence-11-prese-12/#comments Thu, 16 Apr 2026 01:24:11 +0000 https://tablesawfenceonline.com/precision-miter-gauge-system-for-table-saw-kit-withtelescoping-fence-11-prese-12/













KIT INCLUDES: (1) Miter Gauge, (1) Telescoping Fence with Movable Scale, (1) 3″ Fence Flip Stop with Pointer, (1) Handle, (2) 5/16″ Round Knobs, (2) 5/16″-18×3/4″ T-Bolts, (2) Hex Wrenchs, (4) Extra Expansion Discs, and installation hardware. FUNCTION: This miter gauge and fence system features a telescoping fence that can accommodate boards of any width, and a flip stop that ensures your cuts are always accurate. Ball detents hold the 12 movable scale, allowing it to be moved in the t-slot, you can make precise cuts at any angle. FEATURES: The miter gauge aluminum head is machined with 11 preset angle stops and a protractor scale with built-in Vernier scale to set more precise angles. A tool-less mounting to miter gauges using T-bolts and knobs. The extension arm delivers side flexibility but holds firm when the stock is pressed against the stop, and allows repeatable cuts. Telescoping Fence, 3″x 1- 3/8″x 17″ with a 3″ I beam extender that extends 17″ for a total of 34″ and can be used on either end of the fence. FEATURES: This innovative patented flip stop with a curved-based design that eliminates slack and movement, allows you to quickly set your desired points to make repetitive cuts without remeasuring each board. The flip stop can be used with or without a sacrificial fence by’s specially designed arm that accommodates for the extra 3/4 width board without any adjustment. SAFETY & ACCURACY: A must-have for any woodworker who wants to improve their accuracy and safety, this professional miter gauge fence and flip stop combo is a simple, yet effective tool to ensure your projects are always square and true. The flip-stop also helps keep your workpieces secure, preventing them from slipping or moving during the cutting process. BUILD: Made of solid aluminum with hardened anodized surface, making the fence strong, durable, and resistant to corrosion. It also provides a smooth, wear-resistant surface that is easy to clean. Kit Includes: (1) Miter Gauge, (1) Telescoping Fence with Movable Scale, (1) 3″ Fence Flip Stop with Pointer, (1) Handle, (2) 5/16″ Round Knobs, (2) 5/16″-18×3/4″ T-Bolts, (2) Hex Wrenchs, (4) Extra Expansion Discs, and installation hardware. Introducing the Precision Miter Gauge System Kit by. If you’re a woodworker, you know that accuracy, professional looking results, and safety are essential. That’s why you need the Miter Gauge and Fence miter gauge is equipped with a Locking Plunger with spring loaded pin. The most commonly used angles are notched with positive stops 0°, 15°, °, 30°, 45° and 60°. We’ve included telescoping fence that extends up to 34 inches long, so you can accommodate boards of any width. The flip stop ensures your cuts are always accurate, and the rear facing T-slots make it easy to mount to your miter gauge. The extension arm can be used on either end of the fence, delivers side flexibility, but holds firm when the stock is pressed against the stop, allowing repeatable cuts. What really sets this miter gauge and fence system apart is its versatility. The 12-inch movable scale with ball detents allows you to make precise miter cuts at any angle. And the flip-stop also helps keep your workpieces secure, preventing them from slipping or moving during the cutting process. Build and Design The miter gauge fence is made of solid aluminum with hardened anodized surface, making it strong, durable, and resistant to corrosion. Package Includes: (1) Miter Gauge (1) 17″ to 34″ Telescoping Fence with 12″ Movable Scale (1) 3″ Fence Flip Stop with Pointer (4) Extra Expansion Discs (Retain for future use) (4) M4 Screws (for Expansion Discs) (2) 5/16″ Round Knobs G T-Bolt 5/16″-18×3/4 (1) 3 mm Hex Wrench (1) mm Hex Wrench (1) Handle and washer is a of high quality woodworking tools and accessories, machines, and an assortment of OEM parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.

]]> https://tablesawfenceonline.com/precision-miter-gauge-system-for-table-saw-kit-withtelescoping-fence-11-prese-12/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/ https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/#comments Tue, 14 Apr 2026 17:18:56 +0000 https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/








Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. The Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at, 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

]]> https://tablesawfenceonline.com/precision-miter-gauge-with-aluminum-miter-fence-with-45-degree-angled-ends-fo-13/feed/ 0