https://tablesawfenceonline.com Sun, 19 Jul 2026 21:29:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://tablesawfenceonline.com/1-set-miter-and-fence-with-track-stop-sawing-assembly-angle-ruler-for9314/ https://tablesawfenceonline.com/1-set-miter-and-fence-with-track-stop-sawing-assembly-angle-ruler-for9314/#comments Sun, 19 Jul 2026 21:29:41 +0000 https://tablesawfenceonline.com/1-set-miter-and-fence-with-track-stop-sawing-assembly-angle-ruler-for9314/








1 Set Miter and Fence with Track Stop Sawing Assembly Angle Ruler for9314. Features: Suitable for table saw operation, also suitable for flip-chip engraving machine for wood tenoning operation Push handle: Adjustable 0-60 degrees in both directions, accurate scale Please note: There is a slight color difference or discrepancy in kind, please don’t mind! Specification: Length: about 450mm size: 6mm (M6) Standard Location Size: Width 3/4 inch(19mm), Thick 3/8 inch (9.5mm) Fit for 30mm/45mm T-track Material: Aluminium Alloy colour: Red Package Contents: 1 x Push Handle Fence Set.

]]> https://tablesawfenceonline.com/1-set-miter-and-fence-with-track-stop-sawing-assembly-angle-ruler-for9314/feed/ 0 https://tablesawfenceonline.com/table-saw-miter-gauge-with-micro-adjustable-flip-stop-and-extendable-fence-for-6/ https://tablesawfenceonline.com/table-saw-miter-gauge-with-micro-adjustable-flip-stop-and-extendable-fence-for-6/#comments Sun, 19 Jul 2026 13:28:41 +0000 https://tablesawfenceonline.com/table-saw-miter-gauge-with-micro-adjustable-flip-stop-and-extendable-fence-for-6/













Micro Adjustable Flip Stop: The miter gauge is equipped with micro adjustment fence stop, with an accuracy of up to 0.001 inch (0.0254mm), ensuring precise horizontal and oblique cutting; The flip stop is sturdy and stable, without shaking, ensuring safe work during woodworking or crafting projects. It also supports quadrate and inclined workpieces with locating pins 2. Zero Calibration Function: The miter gauge is equipped with zero adjustment knob, providing convenient and fast zero setting without the need for other tools. Firstly, move the fence closer to the sawblade, ensuring there is a space of 1-3mm between the sawblade and the fence. Then, slide and flip the stop block to make contacts with the sawblade. Finally, rotate the zero calibration knob to align the 0 scale 3. Accurate Angle Setting: This table saw miter gauge provides precise positive angle adjustment block, which can quickly set 11 angles of 60°, 45°, 30°, 22.5°, 10°, 0°, -60°, -45°, -30°, -22.5°, and -10°. The fast and stable angle block lock can be easily adjusted to ensure that the angle is firmly locked in place 4. Extendable Fence: The miter gauge is equipped with extendable fence that supports horizontal cutting up to 36 inch. The sturdy structure and stable telescopic system enable precise adjustment. The standard workpiece size is 19.5 inch, is more convenient to use. You can easily cut from 0 to 36 inch using the fence 5. Other Accessories: Featuring mm and inch scales, and also provides flip stop for easy repeated cutting. There are two slots at the front of the baffle, where you can add additional accessories or add the baffle yourself. The front, end, and middle of the diagonal cutting rod are equipped with adjusters to ensure stable and snug sliding on the table saw slot 6. Wide Application: The table saw guide rail is easy to adjust, allowing the sliding rod of the table saw and the miter gauge to fit properly. This table saw angle guide rail is suitable for 3/8 x 3/4 inch T slot and U slot table saws, band saws, and router tables. Item Type: Table Saw Miter Gauge Product Material: Aluminum Alloy Angle Adjustment Options: 60°, 45°, 30°, 22.5°, 10°, 0°, -60°, -45°, -30°, -22.5°, -10° Applicable T Slot: 3/8 x 3/4 inch (19×9.5mm) Angle Fixing Method: 11 Preset Angles Adjustable Fence Range: Approx. 500-950mm / 19.7-37.4in. 1 x Miter Gauge 1 x T Slot Rail 1 x Stop Block 1 x Handle 3 x Hex Wrenches 1 x Open End Wrench. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/table-saw-miter-gauge-with-micro-adjustable-flip-stop-and-extendable-fence-for-6/feed/ 0 https://tablesawfenceonline.com/table-saw-miter-guide-durable-aluminum-alloy-extendable-fence-for-woodworking-2/ https://tablesawfenceonline.com/table-saw-miter-guide-durable-aluminum-alloy-extendable-fence-for-woodworking-2/#comments Sun, 19 Jul 2026 05:27:47 +0000 https://tablesawfenceonline.com/table-saw-miter-guide-durable-aluminum-alloy-extendable-fence-for-woodworking-2/













13 Angle Stops: The table saw miter guide features 13 positive angle stops, allowing quick settings from -60° to 60° with stable stop lock and clear scale. Extendable Miter Fence: Equipped with a 20 inch expandable miter fence, extends up to 36 inches, supporting crosscuts of up to 36 inches. Fine Adjustable Stop: The table saw miter system includes a fine adjustable stop, easy to use, ensuring accurate crosscuts and miter cuts. Aluminum Alloy Construction: Made from sturdy aluminum alloy, our table saw miter system has a sturdy construction, ensuring durability. Versatile Compatibility: Suitable for table saws, band saws, and router tables, the miter guide is suitable for both crosscuts and miter cuts. Item Type: Table Saw Miter Guide Material: Aluminum Alloy Fence Size: Approx. 508mm / 20in (Can be extended to 36 inch). 1 x Angle Push Ruler 1 x Extendable Fence 1 x Fine Adjustable Backing Block 1 x Handle 1 x White Washer 1 x 2.5mm Wrench 1 x 3mm Wrench 1 x Instruction Manual. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/table-saw-miter-guide-durable-aluminum-alloy-extendable-fence-for-woodworking-2/feed/ 0 https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use/ https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use/#comments Sat, 18 Jul 2026 21:26:48 +0000 https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use/

























Micro Adjustable Flip Stop: The miter gauge is equipped with micro adjustment fence stop, with an accuracy of up to 0.001 inch (0.0254mm), ensuring precise horizontal and oblique cutting; The flip stop is sturdy and stable, without shaking, ensuring safe work during woodworking or crafting projects. It also supports quadrate and inclined workpieces with locating pins 2. Zero Calibration Function: The miter gauge is equipped with zero adjustment knob, providing convenient and fast zero setting without the need for other tools. Firstly, move the fence closer to the sawblade, ensuring there is a space of 1-3mm between the sawblade and the fence. Then, slide and flip the stop block to make contacts with the sawblade. Finally, rotate the zero calibration knob to align the 0 scale 3. Accurate Angle Setting: This table saw miter gauge provides precise positive angle adjustment block, which can quickly set 11 angles of 60°, 45°, 30°, 22.5°, 10°, 0°, -60°, -45°, -30°, -22.5°, and -10°. The fast and stable angle block lock can be easily adjusted to ensure that the angle is firmly locked in place 4. Extendable Fence: The miter gauge is equipped with extendable fence that supports horizontal cutting up to 36 inch. The sturdy structure and stable telescopic system enable precise adjustment. The standard workpiece size is 19.5 inch, is more convenient to use. You can easily cut from 0 to 36 inch using the fence 5. Other Accessories: Featuring mm and inch scales, and also provides concealed flip stop for easy repeated cutting. There are two slots at the front of the baffle, where you can add additional accessories or add the baffle yourself. The front, end, and middle of the diagonal cutting rod are equipped with adjusters to ensure stable and snug sliding on the table saw slot 6. Wide Application: The table saw guide rail is easy to adjust, allowing the sliding rod of the table saw and the miter gauge to fit properly. This table saw angle guide rail is suitable for 3/8 x 3/4 inch T slot and U slot table saws, band saws, and router tables. Item Type: Table Saw Miter Gauge Product Material: Aluminum Alloy Angle Adjustment Options: 60°, 45°, 30°, 22.5°, 10°, 0°, -60°, -45°, -30°, -22.5°, -10° Applicable T Slot: 3/8 x 3/4 inch (19×9.5mm) Angle Fixing Method: 11 Preset Angles Adjustable Fence Range: Approx. 500-950mm / 19.7-37.4in. 1 x Miter Gauge 1 x T Slot Rail 1 x Stop Block 1 x Handle 3 x Hex Wrenches 1 x Open End Wrench. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/table-saw-miter-gauge-adjustable-stop-for-woodworking-easy-to-use/feed/ 0 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/ https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/#comments Sat, 18 Jul 2026 13:25:41 +0000 https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/









Enhance the precision of your cutting with our Table Saw Precision Miter Gauge System. The surface is anodized for durability and can accommodate various board sizes. The cutting angle can be adjusted effortlessly using washers, allowing you to personalize your results. Scope of application: For table saws, fences, push handles, guide rails, router saws, assembly rulers, woodworking tools. Table Saw Miter Gauge1 set. Due to different lighting and screen settings, the item color may be slightly different from the picture. Due to different manual measurements, please allow a 1-2cm difference in size.

]]> https://tablesawfenceonline.com/precision-miter-gauge-for-table-saw-aluminum-miter-fence-miter-saw-fence-new-3/feed/ 0 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/ https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/#comments Sat, 18 Jul 2026 05:24:39 +0000 https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/







Precision Micro Adjustable Flip Stop? GOINGMAKE miter gauge for table saw ensures precision cross cutting and miter cut with our micro-adjustable fence stop. The micro adjustable flip stop is easy to use and the accuracy is up to 0.001 inch (0.0254 mm). GOINGMAKE versatile flip stop is solid and stable without shaking, ensuring accurate cutting all the time in woodworking or DIY. We also support square face and angle face workpieces with a locating pin. And you can easily read the scales with our magnifying glass. Fast Zero Calibration Feature for Quick Setup? GOINGMAKE miter gauge provides the fastest zero calibration with our zero adjust knob for easier quick zero setup. First, move the fence close to the table saw blade, and make sure there is a 1 to 3mm gap between the blade and fence. Second, slide the flip stop to touch the blade. Lastly, rotate the zero calibration knob to align the 0 scale. Fast and accurate zero setup without any other tools. So you can always make the precision cross cut and miter cut. And GOINGMAKE miter gauge can also prevent kickback when using table saw and it is safe to use. GOINGMAKE miter gauge table saw jig guide is a must-have table saw accessory. Fast and Accurate Angle Setup? GOINGMAKE table saw miter gauge protractor provides 11 accurate positive angle stop for quick angle set up for 90°, 60°, 45°, 30°, 22.5°, 15°, 0°, -60°, -45°, -30°, -22.5°, -15°. Easy to adjust with our fast and stable angle stop lock make sure lock angles securely in place. You can also cut an angle from -60°to 60° with the clear laser scales. Telescoping Miter Gauge Fence? GOINGMAKE miter gauge can support up to 36-inch crosscutting with our extendable miter gauge fence. Solid construction and stable extension system for precision adjustment. Our standard size is 19.5 inches for standard workpieces, and the size is more convenient for use. You can cut easily from 0 to 36 inches with an extendable fence. Includes mm and inch scales. We also provide a hidden flip stop for repeat cutting. There are 2 slots at the front of the fence, and you can add extra accessories and also add a sacrificial fence by yourself. Not included: sacrificial fence. Zero Fit Miter Bar Fits for Most Table Saw? GOINGMAKE miter bar includes an adjuster at the front, at the end and at the middle. Ensure stable, smooth, and fit sliding on the table saw slot. GOINGMAKE table saw guide is easy to adjust the ring to make perfect fitness between table saw and the miter gauge sliding bar. Our table saw angle guide fits for 3/8 x 3/4 inch T slot and U slot table saw band saw router table.

]]> https://tablesawfenceonline.com/goingmake-table-saw-miter-gauge-with-micro-adjustable-flip-stop-extendable-new-2/feed/ 0 https://tablesawfenceonline.com/800mm-electric-circular-saw-backer-table-saw-fence-tool-aluminum-2/ https://tablesawfenceonline.com/800mm-electric-circular-saw-backer-table-saw-fence-tool-aluminum-2/#comments Fri, 17 Jul 2026 05:21:46 +0000 https://tablesawfenceonline.com/800mm-electric-circular-saw-backer-table-saw-fence-tool-aluminum-2/













Made of high-quality aluminum alloy material, smooth to slide, not easy to deform 2. Using CNC processing to make fine scales 3. The scale fine adjustment knob adopts pure brass knurled nut, easy to adjust 4. Smooth curved lines and comfortable grip which is ergonomic 5. The tenoning caliper design is consistent in the width of each pair of teeth, easy to operate. Item Type: Table Saw Fence. Material: Engineering Plastics + Aluminum Color: Black + Silver Specifications(optional): 800mm Table Saw Fence, 1000mm Table Saw Fence. Suitable for flip-chip electric circular saw. 1 x Scale Chute 800mm. 1 x Small Bracket. 1 x Main Bracket. 1 x Auxiliary Bracket. 1 x Push Handle. 2 x Small Bracket Fixing Block. 1 x Rod Fixing Block. 2 x Main and Auxiliary Bracket Fixing Block. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/800mm-electric-circular-saw-backer-table-saw-fence-tool-aluminum-2/feed/ 0 https://tablesawfenceonline.com/oliver-table-saw-vintage-adjustable-metal-woodworking-square-fence/ https://tablesawfenceonline.com/oliver-table-saw-vintage-adjustable-metal-woodworking-square-fence/#comments Thu, 16 Jul 2026 21:20:42 +0000 https://tablesawfenceonline.com/oliver-table-saw-vintage-adjustable-metal-woodworking-square-fence/






Oliver table saw Vintage Adjustable Metal Woodworking Square Fence.

]]> https://tablesawfenceonline.com/oliver-table-saw-vintage-adjustable-metal-woodworking-square-fence/feed/ 0 https://tablesawfenceonline.com/electric-circular-saw-accessories-aluminum-alloy-table-saw-fence-set-fine-3/ https://tablesawfenceonline.com/electric-circular-saw-accessories-aluminum-alloy-table-saw-fence-set-fine-3/#comments Thu, 16 Jul 2026 05:18:46 +0000 https://tablesawfenceonline.com/electric-circular-saw-accessories-aluminum-alloy-table-saw-fence-set-fine-3/













Made of high-quality aluminum alloy material, smooth to slide, not easy to deform 2. Using CNC processing to make fine scales 3. The scale fine adjustment knob adopts pure brass knurled nut, easy to adjust 4. Smooth curved lines and comfortable grip which is ergonomic 5. The tenoning caliper design is consistent in the width of each pair of teeth, easy to operate. Item Type: Table Saw Fence. Material: Engineering Plastics + Aluminum Color: Black + Silver Specifications(optional): 800mm Table Saw Fence, 1000mm Table Saw Fence. Suitable for flip-chip electric circular saw. 1 x Scale Chute 800mm. 1 x Small Bracket. 1 x Main Bracket. 1 x Auxiliary Bracket. 1 x Push Handle. 2 x Small Bracket Fixing Block. 1 x Rod Fixing Block. 2 x Main and Auxiliary Bracket Fixing Block. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://tablesawfenceonline.com/electric-circular-saw-accessories-aluminum-alloy-table-saw-fence-set-fine-3/feed/ 0 https://tablesawfenceonline.com/vintage-delta-unisaw-jet-lock-fence-fits-27-deep-table-saw/ https://tablesawfenceonline.com/vintage-delta-unisaw-jet-lock-fence-fits-27-deep-table-saw/#comments Wed, 15 Jul 2026 21:17:01 +0000 https://tablesawfenceonline.com/vintage-delta-unisaw-jet-lock-fence-fits-27-deep-table-saw/









This is a rip fence from a vintage Delta/Rockwell unisaw. It fits saws with a 27inch deep table and 1 3/8 inch mounting tubes. The fence is missing (1) a bolt that screws into the top of the fence and (2) the knob that goes on to the end of the fine adjustment gear. The fence is operational without these, but I’ll mention them so you know what you would need for the complete the set up. Also, I noticed a slight bend in the shaft of the locking arm. Again, no interference with operation of the fence, but I’m just mentioning it. Please take a good look at the photos and feel free to ask any questions that you may have.

]]> https://tablesawfenceonline.com/vintage-delta-unisaw-jet-lock-fence-fits-27-deep-table-saw/feed/ 0